Notice for USA and CA market:

1.30A Wifi relay switch for power on / off : max load 3300W for 110V or 6600W for 220V, 70% use recommended for safe(For example , the switch will work perfect if your device is under 2310 watts)

2.This wifi timer switch can work with AC 85V - 250V: People use 110V mostly in USA,So you can connect hot line to the "L" port, and neutral line to the "N" port

3.Do not support device with 2 hot lines : make sure one hot line "In"/"out",one neutral line "In"/"out" only.(If your water heater has 2 hots with 115V for each,then can't use this switch)

4.Main Function: APP control("eWeLink") ; remote control;schedule ;timer ; share control

5.Support DIY smart home system: Lights,water pump, water heater , wall power timer , farm water supply...

6.The switch support 250V single hot line, but can't work with 2 hots device.For example,your water heater has 2 hot line with 115V for each,then can't use this switch

Function:

1.AC85-250V input,1 CH

2.Working model:Jog-lock(Momentary)/ Self-locking/ Interlock/Manual

3.PCBA Size:70mm*50mm*25mm

4.Cover Size:95MM *55MM *32MM

5.Can be paired with 5pcs remote control at the same time

1.How to clean code:

* Press the Paired Button on the board 8 times,light flash,cleaning code successfully.

2.How to set the working model:

* Jog-lock(Momentary):Press "paired button" 4 times

* Self-locking:Press "paired button" twice

* Interlock:Press "paired button" triple times, then press A button ,then B button

3.How to set the wifi model

* Long press the Paired Button on the board,blue light flash,waiting for app.

Standby Power Consumption: <0.5 W

Working environment: Indoor

Working Temperature: -10℃~45 ℃

Humidity: ≤80% RH

Support: Wifi 2.4 GHz 802.11 b/g/n, 2G / 3G / 4G

Wireless Communication Range: 100 m / 328 ft

Material: V0 flame-retardant material 

Dimension: 95 x 55 x 30 mm

Net Weight: 88 g