Permabond A130 Medium Strength Anaerobic Threadlocker

Permabond A130 is an anaerobic threadlocker designed to lock and seal metal parts. The advantage of using Permabond A130 is that it can be easily dismantled for maintenance.
Outstanding vibration and chemical resistance, Permabond A130 can be used to replace mechanical locking devices and on small hydraulic and pneumatic fittings to reduce corrosion.
This product has been approved for contact with drinking water.

Applications

  • Lock and seal metal parts that may need to be undone
  • Suitable for small hydraulic and pneumatic fittings

Features

  • Excellent chemical resistance
  • Lubricates threads for easy assembly
  • Blue colour
  • Vibration resistant
  • Corrosion protection

Regulations / Approvals

  • WRAS listed for contact with wholesome (potable) water

Surface Preparation

Before applying Permabond A130,  surfaces should be clean, dry and free from grease. An IPA wipe can be used for cleaning and degreasing. When bonding zinc, aluminium and stainless steel, you can use an anaerobic activator such as Permabond A905 or ASC10.

Directions for Use

  1. Do not allow the tip to touch the metal surface when applying the product.
  2. If the application involves through holes, simply dispense a bead of material across the thread contact length.
  3. If the application involves blind holes, apply several drops down the threads to the bottom.
  4. Assemble, torque the parts if needed. Always replace the lid to avoid contaminating the remaining liquid adhesive.