Document
Product Description
Features & Details
- High Efficiency: This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.
- Simple Port Control: Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.
- Laser Power Adjustment: The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.
- Open Circuit Security: The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.
- Factory Aging Test: Each power supply will be subjected to a high temperature 60 °C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.
Key Features
-
High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.
-
Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level.
-
Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.
-
Mark Clearly Each data is marked for your convenience. Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.
-
Security Function Open circuit security function, it can be used to detect the presence or absence of waterway, guard the laser; It can better guard the laser power and prolong the service life.
-
Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes.
Specification:
- Power: 40W
- Input Voltage: AC110V
- Maximum Output Voltage: 23KV
- Maximum Output Current: 20mA
- Efficiency: 90%
- Response Speed: ≤1ms
- Cooling Method: Fan Cooling
- Gross Weight:1.2 kg/ 2.64 lbs
- Package Size: 23x23x12cm/ 9x9x5.11 inch
Package Content:
- 1 x 80 cm Cable
- 1 x Laser Power Supply (40W)
People Who Bought This Item Also Bought
Laser Power Supply
Easy to Use & Compact Construction & Durable to Last
The CO2 laser power supply is small, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube.
- High Efficiency
- Simple Port Control:
- Laser Power Adjustment
- Open Circuit Protection
Key Features
-
High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.
-
Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level.
-
Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.
-
Mark Clearly Each data is marked for your convenience.Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.
-
Security Function Open circuit security function, it can be used to detect the presence or absence of waterway, guard the laser; It can better guard the laser power and prolong the service life.
-
Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes.
-
Package Content:
- 1 x 80 cm Cable
- 1 x Laser Power Supply (40W)
Specification:
- Power: 40W
- Input Voltage: AC110V
- Maximum Output Voltage: 23KV
- Maximum Output Current: 20mA
- Efficiency: 90%
- Response Speed: ≤1ms
- Cooling Method: Fan Cooling
- Gross Weight:1.2 kg/ 2.64 lbs
- Package Size: 23x23x12cm/ 9x9x5.11 inch
Features & Details
- High Efficiency: This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.
- Simple Port Control: Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.
- Laser Power Adjustment: The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.
- Open Circuit Security: The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.
- Factory Aging Test: Each power supply will be subjected to a high temperature 60 °C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.
|