Description:

This Rebar Tier/Automatic Rebar Tying Machine Is a Hand-held Battery-type Steel Bar Fast Bundling Tool Set . It Is an Intelligent Tool with Built-in Microcontroller, Which Can Automatically Complete All Steps of Steel bar Bundling, and Can Be Widely Used in the Field of Construction Engineering to Replace Manual Bundling of Steel Bars. It Has the Trait of Safety and Credibility, Reasonable Structure, Advanced Craft, Simple and Convenient Operation, High Efficiency and Convenient Maintenance.

Specifications:

- Color: Orange
- Material: Plastic + Metal
- Voltage: 12V
- Battery: 12V Lithium Ion Batteries
- Battery Capacity: 13200 Mah
- Battery Charging Time: 1.5 hours full filling
- Tying Wire Diameter: 0.8mm
- Tying Wire Length: more than 110 m
- Applicable Scope Of Steel Strapping: 30 mm - 60 mm
- Knot Wire Length: 40cm and above
- Knot Number Per Charge: 3000 times
- Knot The Required Time: 0.8 seconds at a time
- Cable Length: 95cm / 37.40''(appr.)

Weights & Dimensions:

- Machine Size: 290 mm * 65 mm * 195 mm / 11.42''x2.56''x7.68''(appr.)
- Weights: Approx. 3.4kg 

Features & Highlights:

- Compact Size, Lightweight, Easy to Grab.
- It Can save 3-5 Times than Man Power by Hand.
- Rebar Tier Is a Hand Held Machine Used to Pack Rebars Quickly.
- It Is a Miniature Motor Tool Has the Trait of Safety and Credibility.
- Used for Building Market, Including Civil Building, Floor Pipe, Heating Floor Mesh, Steel bar, Etc.
- Reasonable Structure, Advanced Craft, Simple and Convenient Operation, High Efficiency and Convenient Maintenance.

Package Included:

- 1X Tying Machine
- 1X Pliers
- 1X Charger
- 1X User Manual
- 2X Lithium Ion Batteries
- 1X Tying Wire

Operation Instruction:

1. The Rebar Tirer's Jaws Are Stuck to the Intersection of the Steel Bars, and the Steel Bars Are Hooked at 45 Degree Angles.
Note: There Can Be No Barrier Between the Mouth of the Jaws and the Wire.
2. Press the Start Switch, the Rebar Tirer Machine Carries on the Work (Spins, Hinges Tightly, Cuts off)
Note: Press One Button at a Time, Do Not Probe the Jaws at Work.
3. When Automatic Completion, the Jaw from the Steel bar Intersection and Then Pull Back, Complete the Process and Prepare for the Next Binding.
4. When the Binding Process Is Not Completed, Do Not Unplug the Machine in Advance, Otherwise It Will Cause the Bundling of the Goods Tied Skidding.

Maintenance:

1. Clean the Machine Regularly, Keep the Wire Mouth Clean.
2. This Product Can Not Be Placed Randomly, so As Not to Cause Damage to Parts.
3. Batteries Must Not Be Placed Together with Other Metal Objects to Avoid Short Circuit.
4. Non-professional Do Not Disassemble the Machine Arbitrarily, Lest Cause Damage.
5. When You Encounter an Unresolved Failure, Please Give It to the Professional Repair.

Safety Rules:

1. Please Read the Instructions Carefully Before Using This Product.
2. in the Process of Machine Bundling, It Is Strictly Forbidden to Touch the Jaws by Hand Under Any Circumstances.
3. in the Process of Machine Bundling, It Is Strictly Forbidden to Touch the Wire Disc and Wire by Hand.
4. When the Machine Sounds an Alarm, the Machine Must Be Powered off Immediately, and Then Work After the Fault Is Eliminated.
5. When Inserting the Battery, It Must Be Inserted According to the Indication of the Positive and Negative Poles.
6. Do Not Allow the Battery to Be Close to High Temperature Objects Such As Open Flames.
7. It Is Strictly Forbidden to Expose the Battery Directly to the Humid Environment Such As Rain.
8, This Product Should Try to Avoid Collision, so As Not to Cause Product Damage
9. This Product Must Be Charged Using the Specified Charger. the Damage and Accident Caused by the Use of Other Non-designated Chargers Will Be at Your Own Risk.
10. This Product Must Use the Specified Battery. the Damage and Accident Caused by the Use of Other Non-designated Batteries Are at Your Own Risk.
11. It Is Strictly Forbidden to Connect the Battery Positive and Negative Without Load.
12. If You Find Deformation Such As Battery Swelling, Please Stop Using It.
13. When Inspecting or Repairing the Product, You Must First Turn off the Power of the Machine and Unplug the Battery.
14. It Is Strictly Forbidden for Non-professionals to Disassemble This Product.
15. This Product Should Be Placed in a Place Where Children Should Not Be Exposed to Avoid Injury.
16. When the Steel Machine Is Not in Use, It Should Be Stored in a Dry, Clean and Non-corrosive Atmosphere.
17. Failure to Use the Product in Accordance with the Relevant Operational Specifications and Safety Rules of This Instruction, and the Damage and Accident Caused by the Consequences Shall Be at Your Own Risk.