Specification:
Wireless Remote Control
Material: ABS Plastic
Battery:23A Battery (not included)
Operating voltage: 12V
Frequency: 433MHZ
Current job: 9 ~ 12mA
Transmitting power: 10-15mw
Frequency deviation: ± 0.2MHz
Size (approx.): 58x38x15 (mm) (LxWxH)
Suitable for all lights.
Easy to install and simple to use.
Energy-saving and environment protection
Fast response and long control distance.
Application: Garage Door, Household Electrical Appliances, RGB lights
Stable performance and strong to resist interference, not obstructed by walls and furniture!
Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased)
Characteristic: Double control(wall switch function and control function),safety(the shell applies to the fire-retardant material),easy installation(just wire connection)

1 Channel Wireless Relay Switch
Channel: 1CH
Output Current: 10A
Input Voltage: DC10-14V
Working Voltage: DC12V
Standby Current: ＜5MA
RF Frequency: 433MHZ
Receiver Sensitivity: >90dBm
Dimension (approx.):3.5*3*1.6cm
RF Working mode: Super heterodyne receiver
Remote Control Distance: >100 meter(In open environment)
Decoding Way: MCU Software decoding
Can store the number of remote control:50
Support remote control type: Fixed code, learning code
Wiring Method: Fixed wiring terminal
Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC
Output: Normally open, Common, Normally closed
Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)

Working/output way:
Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
Delay: Press remote control relay pull-in, release the remote control and begin timekeeping, after 5s,10s,15s will automatically close the relay
Package Included:
1x 1 Channel Wireless Relay Switch
1x Wireless Remote Control (not include the battery)

Note:
If want to change the modes, need delete the present learning mode(Press the white learning button on the control panel eight times), and then re-learn the new features
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

 
Specification:
Wireless Remote Control
Material: ABS Plastic
Battery:23A Battery (not included)
Operating voltage: 12V
Frequency: 433MHZ
Current job: 9 ~ 12mA
Transmitting power: 10-15mw
Frequency deviation: ± 0.2MHz
Size (approx.): 58x38x15 (mm) (LxWxH)
Suitable for all lights.
Easy to install and simple to use.
Energy-saving and environment protection
Fast response and long control distance.
Application: Garage Door, Household Electrical Appliances, RGB lights
Stable performance and strong to resist interference, not obstructed by walls and furniture!
Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased)
Characteristic: Double control(wall switch function and control function),safety(the shell applies to the fire-retardant material),easy installation(just wire connection)

1 Channel Wireless Relay Switch
Channel: 1CH
Output Current: 10A
Input Voltage: DC10-14V
Working Voltage: DC12V
Standby Current: ＜5MA
RF Frequency: 433MHZ
Receiver Sensitivity: >90dBm
Dimension (approx.):3.5*3*1.6cm
RF Working mode: Super heterodyne receiver
Remote Control Distance: >100 meter(In open environment)
Decoding Way: MCU Software decoding
Can store the number of remote control:50
Support remote control type: Fixed code, learning code
Wiring Method: Fixed wiring terminal
Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC
Output: Normally open, Common, Normally closed
Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)

Working/output way:
Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
Delay: Press remote control relay pull-in, release the remote control and begin timekeeping, after 5s,10s,15s will automatically close the relay
Package Included:
1x 1 Channel Wireless Relay Switch
1x Wireless Remote Control (not include the battery)

Note:
If want to change the modes, need delete the present learning mode(Press the white learning button on the control panel eight times), and then re-learn the new features
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.