This AP-C30K Series digital air pressure sensor incorporates a two-color LED display, as well as superior functionality. The highest resolution in its class.
This replacement for mechanical pressure gauges features a unit conversion function, allowing the pressure to be displayed in any of four pressure units. Additionally, a rotary pressure port provides 180° rotation for ease during installation. Two colors - Green / Red
• Type: Multi range, NPN, Strain gage
• Scale: Pounds per square inch; Kilopascals; bar; Inches of Hg; kg/cm2; mmHg
• Rated pressure:
Compound pressure mode: ± 29.9 inchHg / ± 14.7 psi / 101.3 to -101.3 kPa /
Negative pressure mode: 0 to -29.9 inchHg
Positive pressure mode: 0 to 29.5 inchHg
• Suitable for Air or non-corrosive gases
• Type of pressure: Gauge pressure
• Display: 3 1/2-digit, 2-color, 7-segment LED (Character height: 0.43" (11 mm)) Display cycle: 10 times/s
• Operation indicator: Red LED x 2 (corresponding to control output 1 and 2)
• Display resolution
• Multi range: Negative/Positive 0.1 inchHg, Compound 0.1 inchHg
• Power 12 - 24 VDC
12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less
• I/O
• Analog output
1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
• Zero-shift input
Input time: 2 ms or more. (or analog output selectable)
• Control output
NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)
• Pressure port
NPT 1/8 180 ° rotation
• Power voltage
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
• Environmental
Max Pressure resistance ➟500 kPa
Temperature 0 to 50 °C 32 to 122 °F (No freezing)
Relative humidity ➟ 35 to 85 % RH (No condensation)
Included Accessories
Power supply cord (6.6' 2-m with connector
AP-B01 ➟Horizontal Mounting Bracket
AP-B02 ➟Wall Mounting Bracket
AP-A01 ➟Panel Mounting Bracket
Also included: 16VDC power supply (Not Keyence)
Weight
Approx. 30 g (without cable) /Approx. 85 g (with 6.6' 2-m cable)