Glowshift's 1/8-27 NPT Female to 1/8 BSPT Male Adapter was made for oil pressure and fuel pressure sensors that will not thread into your vehicle stock port. If the threads of your sensor and the vehicle stock port do not match, this brass sensor adapter acts as a bridge between the two, enabling a seamless and effective installation. As a fuel pressure gauge adapter, this accessory will enable you to take extremely accurate fuel pressure readings. As an oil pressure sender adapter, you will be able to install your oil pressure sensor for accurate oil pressure readings. It is also recommended that you use Teflon tape on each thread to create a secure, reinforced connection that prevents any leaks. GlowShift makes the process easy with detailed instructions and free lifetime tech support to walk you through step-by-step.
Quick InstallWith a few simple steps Glowshift's 1/8-27 NPT Female to 1/8 BSPT Male Adapter can be installed along with your fuel pressure or oil pressure sending unit. This adapter works with any vehicle type that has these threads. In a matter of no time you’ll be able to connect to your gauge and start taking readings. | Remove the Port PlugRemove your vehicle’s port plug, making sure there is enough clearance for the 1/8-27 NPT Female to 1/8 BSPT Male Adapter. | Install the AdapterThread the 1/8-27 NPT Female to 1/8 BSPT Male Adapter into the vehicle’s stock port, and confirm that it is secure. | Thread In The SensorThread the fuel pressure or oil pressure sensor into the 1/8-27 NPT Female to 1/8 BSPT Male Adapter and tighten. |
GlowShift is your source for cutting-edge aftermarket automotive products specially designed for cars and trucks. Our diverse lineup includes a variety of gauges, gauge pods, and gauge accessories such as adapters, sensors, wiring harnesses and much more.