Kalawen Color Projection Alarm Clock Multifunctional Time Date Weekday Temperature Humidity LCD Dispaly

Kalawen clock projector

• The Kalawen Weather Station Projection Alarm Color Weather forecasts in the next 12 hours in dynamic icons: sunny, slightly cloudy, cloudy, rainy, heavy rainy, snowy. Projects time and temperature onto ceiling or walls so you can tell time simply lying on the bed.
• Clear night projection, comfortable dual alarm clock, snooze, automatic calibration time according to local radio control, time, date, indoor and outdoor temperature and humidity, month Phase, hot index and dew point index.
• Time & Alarm Setting

Manual Time Setting & Auto RCC Time-Calibration - Long Press "SET" Button

1. RCC ( Automatic radio-controlled time calibration ): long press "SET" button will display first RCC setting. You'll see a symbol of antenna. If RCC ON, the projection clock with indoor and outdoor temperature will calibrate time automatically while the clock is turned on or at night based on the local radio signal. And the screen display will turn off while calibrating time.
2. Time setting: long press "SET" button, then short press it in turn to set the time manually. ( If you don't want to wait for RCC auto time-calibration or you don't want the clock screen turn off to calibrate time at night, you can turn RCC off and set the time manually. )
3. If you want to activate RCC manually, please hold “+/CH” for 3 seconds, the clock will start RCC.
4. If you want to completely turn off RCC function, please long press “SET” and then “ + ” or “ - ” to turn the flashing part to “OFF” . RCC function won’t turn on automatically.

• The points of projector clock

1. The product will automatically turn on the radio wave signal reception within 5 minutes after the host power supply is turned on.
2. At this time, the projection alarm clock will enter a black screen state to reduce signal interference.
3. Manual “SNOOZE” button can wake up the screen, or short press “-” button to manually turn off the radio wave function reception.
4. The alarm clock with weather station will automatically turn on the radio wave function at 1 o'clock every night. At this time, it will be black screen. Repeat the 3 method to wake up the screen. If the product fails to receive due to signal interference, the radio wave function will be turned on again in the next hour. Three points deadline. In addition, manually press and hold the "-" button to turn on the radio wave function.
5. Radio wave function receiving time: 3-7 minutes to link, automatic calibration time (according to signal strength and other surrounding signal interference)
6. After powering on the projection clock, it will soon activate RCC function (Radio-controlled automatic time-calibration, abbr. RCC / DCF). During the process, the display screen will automatically turn off to reduce other interference. After the process(in 7 minutes), the screen will light up again.Every night, at 1:00am, 2:00am, 3:00am, it will start RCC. If the reception of RCC signal fails due to signal interference or weak signal, it will start again at 4:00am. If fails again, it will start again at 5:00am. After 5:00am, whether successful or not, it will not automatically start RCC.
7. If the weather station has not received transmission from the remote sensor ("- -" on the LCD), press and hold the "Down" button for 3 seconds to receive the transmission manually. Open the back cover of the outdoor sensor and press TX Button to let the outdoor unit send a signal to the host, establishing a direct connection between the outdoor sensor and the weather station.

• The notes before using of projection clocks

1. If the projection clock screen turns off when you turn the projection clock on, it's because it begins to calibrates time automatically based on local radio-controlled time, not because it's defective. The screen will light up after it finish the auto time-calibration.
2. If the weather station clock can't display outdoor temperature or humidity correctly, it's because it is conferming the signal while just turned on, it needs about 5 minutes to conferm. And it needs about 30 minutes to stabilize the signal.
3. Please read the user manual of alarm clock projection on ceiling carefully before using this multi-function alarm clock, and keep this user manual in a safe place for future reference.
4. The sound size cannot be adjusted. The alarm ringtone cannot be adjusted.
5. Please gently wipe the LED screen with a lens cloth to avoid scratching the surface.

WIRELESS COLOR WEATHER STATION Channel Swtching & Channel Loop Function - Short Press "+/CH"

The indoor projection clock has a built-in sensor, and the outdoor sensor has a built-in sensor. So our projection clock can display both indoor and outdoor temperature and humidity. With barometric sensor in outdoor sensor, the projection clock can forecast the weather of the day.

The projection clock can be connected to 3 outdoor sensors. The channels of wireless projection clock and the outdoor remote sensor should be turned to the same. For example, if you set the projection clock to channel "2", you should set the remote sendor to channel "2" by switch channel button under the battery cover.

In order to ensure that the device can receive signals quickly, please follow the steps below: Power on the weather station first.Then power on the sensor.Confirm that the clock and the sensor are in the same channel.After establishing a connection, the sensor transmits data every 60 seconds to update the temperature and humidity data.