Features:
1. Supports motherboards with DDR2 and DDR3 interfaces without external power supply.
2. Uses an LED to indicate the interruption and short circuit of the address line of the data line used for repairing the non-powered motherboard.
3. Due to different motherboard designs, some lights may not light up. The same motherboard can be used to assess the error.
4. If the lamp fully lights up when testing a DR3 motherboard, it means that the resistance of the address line does not need to be tested.
5. It is highly durable and resistant due to heat treatment.
Specifications:
Material: PCB
Interface: for / Motherboard DDR2 DDR3
Scope: Desktop
Size: 13.3 * 6 * 1 cm / 5.2 * 2.4 * 0.4 inches
Weight: approximately 28g
Package List:
1 * Tester Card
Instructions for Use:
1. Install the 3V battery (CR2032) in the tester and test each memory slot of the corresponding DDR2 and DDR3 motherboards. If the motherboard has no power, press the button switch on the tester, the test lamp will be very bright and the brightness will be the same. The signal line is normal. If the light does not light up or is particularly bright, there is a short circuit fault in this signal. (Note: In the test for -motherboards, motherboards do not connect the CPU, and in the test for -motherboards, various connection cards (e.g. 940 motherboard, AM2 motherboard, 1207 motherboard, 1366 motherboard) can be measured to insert the CPU, the test light will be bright.)
2. When testing the DDR2 motherboard, there is no pull-up exclusion in the address line, all lights are bright, which is normal. If there is a pull-up exclusion, the address line will light up, indicating that only this exclusion is not open, but it can also be determined with the pointer table whether the BGA address line is open. (To determine whether the pull-up exclusion is generally designed next to the general exclusion in the memory slot. There are several exclusions, one end is connected to the address line, and the other end is connected to the power supply.)
3. Pointer table for determining the address line method: Attach the pointer table to X1, so one ohm, with a black table pen on the motherboard, measure it with a red table pen, or measure the DDR2 address line hole and the address line resistance of BGA address line without soldering, such as a larger swing, indicating that it is a BGA-solderable circuit board or wire break fault.
Please note that our list price includes the value of goods, packaging costs, and export taxes, but does not include international import duties. Import duties, taxes, and charges are the buyer's responsibility to check with the customs office of your country for additional costs prior to purchasing. Any disputes arising from import duties will be submitted to eBay for resolution.
1. For any questions, please contact us via eBay message or email. We will reply to your message within 48 hours. If you do not receive our response within 48 hours, please post a message again, as our messaging system may block some emails.
2. If you are satisfied with our service, please leave us positive feedback and give us a detailed seller rating of "5 stars" in all areas.
3. Our goal is to provide top-level customer service. Your recognition will greatly encourage us and help us serve you better. We strive to satisfy all our customers.
We will always do our best to exceed your expectations in customer service, communication, and shipping of your orders.
On 09/09/2023, the seller added the following information.