ELM327 USB Diagnostic Cable With Switch

Please pay attention:

1. This one is 100% Hardware V1.5 ELM327 USB & Switch. The Chip isPICI8F25K80.

2. Support models open hidden function!!!!

3. Majority for moderm modules are accessoible only through this protocol.

4. Beside added functionality, this device works as normal OBD2/EOBD code reader on all

   supported vehicels.

5. When you use it with software of FoCCCus. It just supports 2 kinds of languages:

English & Russian.

When you use it for other cars. It can support 13 kinds languages:

Czech,Danish,German,English,Spanish,French,Croatian,Hungarian,Italian,Polish,Serbian,Turkish and russian

6. V1.5 elm327 supports 9 kinds of protocols. But V2.1 elm327 just supports 7 kinds of protocols. It supports more cars and better quality than V2.1 elm327.

7. This one ONLY works with gasoline car .It can NOT work with diesel car.

It works with almost any brands of gasoline car.

As this device can support multi-brands and we do not test it on all cars, we can not make sure whether it can be used on your car, maybe you can buy one to have a try. Many thanks.

Product Description

Top 4 Reasons to Get Plastic USB ELM327:

1: Latest ELM327 includes PIC25K80 and CH340T.

2: Manufactured modification to include a switch to connect to different CAN buses, MS CAN bus and HS CAN bus.

3: Designed For FORScan software, compatible with software venders; For FORScan, For Elmconfig, For FF2 and 

      For FoCCCus, plus more.

4: Support Windows XP and WIN7 32bite.

OBDII Protocols:

SAE J1850 PWM (41.6Kbaud)

SAE J1850 VPW (10.4Kbaud)

ISO9141-2 (5 baud init, 10.4Kbaud)

ISO14230-4 KWP (5 baud init, 10.4 Kbaud)

ISO14230-4 KWP (fast init, 10.4 Kbaud)

ISO15765-4 CAN (11bit ID, 500 Kbaud)

ISO15765-4 CAN (29bit ID, 500 Kbaud)

ISO15765-4 CAN (11bit ID, 250 Kbaud)

ISO15765-4 CAN (29bit ID, 250 Kbaud)

SAE J1939 CAN (29bit ID, 250*Kbaud)

CAN (11*bit ID, 125*Kbaud)

CAN (11*bit ID, 50*Kbaud)

Introduction:

With the cable and the one of the supported software vendors you can detected modules which are not visible for regular

OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never 

displayed by other OBD2 scanners and a standard ELM327.

Basic Features:

Reset fault /trouble codes / parameter ids (PIDs)

Change car configuration data

Run tests

Services procedures

Program certain models

Pin Configurations:

Switch position one:  HS CAN - Occupies pins 6 and 14

Switch position two: MS CAN - Occupies pins 3 and 11

Supported Software:

For FORScan

For Elmconfig

For FoCCCus

For FF2

Plus more

Please note that many models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.

ELM327 supports For HS CAN from the stock, because For HS CAN completely matches to the OBD2 standards. 

It occupies pins 6 and14. MS CAN bus occupies pins 3 and 11.

Supported Vehicles:

Many vehicles that can be addressed using an ELM via an OBDII connector.

Packing List:

1 x ELM327 Diagnostic Interface

NO CD