--- CHUSYYRAY H11 LED HEADLIGHT BULBS KIT
--- H8 H9 H11 60W 6000K PURE WHITE LIGHT HIGH LOW BEAM,FOG LIGHT.
--- 200% brighter than halogens Bulbs,Provide Reasonable distance & Wide of view.
--- Copper Plate Chip,Increase 100% Heat Dissipation,Protect LED Chips,Extend Lifespan
--- 9000 rpm Fan To Accelerate Heat Dissipation,Increase 80% Heat Dissipation
--- Adopted opening high speed cooling fan design, less noise and better heat dissipation.
--- 2 sides emitting ensure for the better beam pattern and brightness.
--- Customized latest CSP chips, light efficiency increased by 25% comparing with ordinary chips
--- Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front.
--- This model don't come with CANBUS Error Free function, Please contact us if you need CANBUS model.
--- H8 H9 H11 60W 6000K PURE WHITE LIGHT HIGH LOW BEAM,FOG LIGHT.
--- 200% brighter than halogens Bulbs,Provide Reasonable distance & Wide of view.
--- Copper Plate Chip,Increase 100% Heat Dissipation,Protect LED Chips,Extend Lifespan
--- 9000 rpm Fan To Accelerate Heat Dissipation,Increase 80% Heat Dissipation
--- Adopted opening high speed cooling fan design, less noise and better heat dissipation.
--- 2 sides emitting ensure for the better beam pattern and brightness.
--- Customized latest CSP chips, light efficiency increased by 25% comparing with ordinary chips
--- Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front.
--- This model don't come with CANBUS Error Free function, Please contact us if you need CANBUS model.
Specification:
Brand: CHUSYYRAY
Bulbs Size: H8/H9/H11
Power: 60W/Pair
Power Factor (PF):0.90
Lumen: 6000 lm/Pair
System Efficacy (lm/w):150 lm/w
Color Rendering Index (CRI):80
Total Harmonic Distortion (THD):12%
Voltage:DC 12V-24V
Color temperature: 6000K White
Beam Angle:360°
Start up: 0.1s Illumination
Lifespan: 50000H
LED Chips: CSP-1860,55mil
Brand: CHUSYYRAY
Bulbs Size: H8/H9/H11
Power: 60W/Pair
Power Factor (PF):0.90
Lumen: 6000 lm/Pair
System Efficacy (lm/w):150 lm/w
Color Rendering Index (CRI):80
Total Harmonic Distortion (THD):12%
Voltage:DC 12V-24V
Color temperature: 6000K White
Beam Angle:360°
Start up: 0.1s Illumination
Lifespan: 50000H
LED Chips: CSP-1860,55mil
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the Headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the Headlight when adjusting the bulb.
FAQ
Q1: Will the bulbs suitable for my vehicle?
1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above.
2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand.
3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit!
Q2: What if I encounter a dashboard error message or flickering?
A: All the CHUSYYRAY LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem.
Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor.
Q4: How to get the best light output?
A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page.
Q5: What should I do if there is a quality problem?
A: Please send ebay message to us, we will solve any problems for you as soon as possible.
Q6: The bulbs doesn't fit my vehicle.
1. The bulbs size maybe wrong, pls double check before order.
2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you.
Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.
Q1: Will the bulbs suitable for my vehicle?
1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above.
2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand.
3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit!
Q2: What if I encounter a dashboard error message or flickering?
A: All the CHUSYYRAY LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem.
Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor.
Q4: How to get the best light output?
A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page.
Q5: What should I do if there is a quality problem?
A: Please send ebay message to us, we will solve any problems for you as soon as possible.
Q6: The bulbs doesn't fit my vehicle.
1. The bulbs size maybe wrong, pls double check before order.
2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you.
Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.