Wirelessly control your lens focus, iris, or zoom with this Teradek CTRL.3 Motor Wireless Lens Control 1-Motor Kit. The kit includes a CTRL.3 wireless lens controller, an MDR-X wireless receiver, a MOTR.X super-speed brushless lens motor, LP-E6 batteries and a charger, a 19/15mm rod clamp, one iris overlay mapping disk, five focus overlay mapping disks calibrated in feet, five focus overlay mapping disks calibrated in meters, five extra white marking disks for the controller, and a controller neck strap, as well as motor, controller, USB, and power cables. A vinyl zipper bag is included for your accessories, and a hard-shell case with custom foam is also included to carry the entire kit.
Connect the 0.8 MOD lens gear motor to your lens, mount it on a 19 or 15mm rod system, and then connect the wireless receiver to the motor using the included cables. Each MOTR.X super-speed motor features six times the service life of brushed motors and has higher torque and speed compared to previous models. The MDR.X receiver can control up to three lens motors for 3-axis focus, iris, zoom control, and includes RED camera support.
The CTRL.3 controller can then connect and finely control either the focus, iris, or zoom from up to 5000' away. It is powered by the included LP-E6 batteries, and can also connect to the motor with the included controller cable for a wired setup.
The overlay marking disks are automatically calibrated in feet and meters with the included lens mapping firmware license, and extra white marking disks are included for manual marking. The firmware can also pair with a SmallHD monitor using the included cables and can display lens data directly onto the monitor. Read more below about the items included in this kit.
Teradek CTRL.3 Three-Axis Wireless Lens Controller
For precise lens control with your Teradek RT motors and receivers, the Teradek CTRL.3 Three-Axis Wireless Lens Controller can control focus, iris, or zoom with ease. The CTRL.3 has an outdoor wireless range of 5000' and an indoor wireless range of 500'. You can also use the included 5-pin monitor interface cable to connect directly to a monitor.
The large focus knob, flexible mounting options, OLED display for configuration and lens data, and its lightweight design make the CTRL.3 accessible and easy to use. It's powered by a single LP-E6 battery (available separately) which provides approximately 36 hours of usage time. Features include a lens mapping firmware update to utilize the included pre-marked focus or iris rings for quick autocalibration when switching lenses during a shoot. T
Run/stop control for RED (EPIC, SCARLET, WEAPON, RAVEN, etc.), ARRI (ALEXA, AMIRA, etc.), Phantom, Sony F55, and LANC cameras (Blackmagic, Canon C100/300/500, Sony FS7, etc.)
Knob, slider, zoom x/y, and rollers (a + b)
Lens data overlays on SmallHD monitors running OS3 allow you to get follow focus information directly on your monitor including focal distance, focal length, iris, and zoom
MDR.X, MDR.ACI, and RT iOS app Bluetooth compatibility
Manage, update, and configure your Teradek RT system with the Teradek RT app for iOS
Four 1/4"-20 threads, an ARRI rosette with M6 thread, and lanyard mount for mounting
Slot for a Canon LP-E6 battery (6.2 to 8.4V)
5-pin locking connector for wired mode
USB port provides monitor interface and wired control
Pre-marked rings come in imperial & Meter units
Teradek RT MOTR.X Brushless Lens Motor
Use the Teradek RT MOTR.X Brushless Lens Motor with Teradek RT series receivers and controllers to control your focus, iris, or zoom with its super-speed, high-torque design. The motor comes with a standard 0.8 MOD cine gear which can be swapped out for different-size, separately available gears. Its durable aluminum design helps it prevent damage in the field.
The MOTR.X features one input and one output motor control port, and it can be daisy-chained with other MOTR.X motors to limit the need for additional cabling. The ultra-quiet motor's 3Nm torque allows you to control your lens with ease and speed at up to 6.2 revolutions per second. The built-in rod clamp supports mounting on 15 or 19mm rods.
Super-speed focus, iris, or zoom lens motor
Features 3Nm torque and a maximum speed of 6.2 revolutions per second
One input and one output motor control port allows for daisy-chaining with other MOTR.X motors
Built-in rod clamp allows mounting onto 15 or 19mm rods
Constructed with aluminum for durability
Teradek MDR.X 3-Channel Lens Control Receiver
Connect this to your camera's lens support motors and drive your focus, iris, and zoom wirelessly with the MDR.X 3-Channel Lens Control Receiver with Bluetooth from Teradek. The unit is compatible with all RT motors and controllers, allowing run/stop control with a variety of cameras and camera control with RED DSMC2 cameras. The unit features two auxiliary control ports, letting you use available hardwired controllers.
An integrated OLED display allows you to easily set your device and see the settings, and you can also use the available Teradek RT app to manage, update, and configure the device. This ultracompact, lightweight unit weighs 4.8 oz and is powered via a 2-pin LEMO connector requiring 7 to 17 VDC.
Multiple Inputs/Outputs
Three motor ports for focus, iris, and zoom
Two auxiliary inputs for wired control (via Teradek RT thumbwheel/zoom rocker)
One cam output for RED DSMC2 camera control
Camera Control
Run/Stop control, including but not limited to:
ARRI ALEXA, ALEXA Mini, AMIRA, etc.
Blackmagic
Canon C100, C300 (MkII+), C500
Panasonic VariCam
Phantom
RED DSMC2, DSMC, ONE
Sony F5, F55, FS7 (MkII+)
RED DSMC/DSMC2 camera control:
EF/AF focus/iris
Shutter
ISO
Button features 2x magnification, edge, and focus assist
Compact and Lightweight
The unit's small form factor makes it perfect for all camera setups, especially those on gimbals, handheld rigs, cranes, drones, and other movement rigs.
OLED Display
Each receiver includes an on-unit OLED display with push buttons for configuring motor axes, as well as displaying status readouts including wireless channels, battery voltage, and more.
Wireless Range
RT FHSS
Line-of-sight: Up to 5000'
Indoors: Up to 492'
Bluetooth 5
Theoretical maximum range of 800' (actual range will vary)
Teradek RT App
Manage, update, and configure every piece of your Teradek RT system via Bluetooth 5 with the Teradek RT app for iOS. Create lens maps, configure FIZ settings, perform basic camera controls, update firmware, and much more from the convenience of your smartphone or tablet.
Teradek RT Controller Neck Strap
This RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.
Teradek RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount
The RT Receiver Rod Clamp from Teradek is used to securely mount an RT receiver to a single 19mm or 15mm rod. Mount the Receiver Rod Clamp directly to the 1/4"-20 thread on an MDR-M or MK3.1 Receiver, or to the 1/4"-20 thread on the mounting bracket for the MDR-MB unit. This compact, double bracket's 1/4"-20 thumbscrew fastens to a 19mm rod on one flank, or to a 15mm rod on the other.
Teradek Monitor Bracket for CTRL.1/CTRL.3 Hand Controllers
This Monitor Bracket from Teradek is designed to mount the SmallHD FOCUS, CINE 7, or 703 Bolt monitor directly on the CTRL.1 or CTRL.3 hand controller.