| PP 52mm Float Switch |  |
PP Liquid Water Level Sensor Horizontal Float Switch Down 52mm Package Included:1PC*PP 52mm Liquid Water Level Sensor |
| Stainless Steel Float Switch 45mm |  |
Material: Stainless Steel SUS Cable Length:About 30cm Working Temperature:-30℃~+125℃ Color:Silver Tone Body Material:SUS304 1x Stainless Steel Vertical Water Level Switch Max Contact Rating: 10W/SPST Max Switching Current: 0.5A Max Carry Current: 1A Max Switching Voltage: 100VDC Max Breakdown Voltage: 220V DC Max Contact Resistance: 100mΩ This is a Mini stainless steel float switch,contains no mercury. This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device. This Mini float switch is a simple structure,easy installation liquid level controller.It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperature can be used in any environment. Light weight and simple working principle,high reliability. The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water`s rise or fall. The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm. Package Included:1PC*MINI Indicator Vertical Water Level Sensor Stainless Steel 45mm Float Switch
|
| Right Angle Float Switch |  |
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.
Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach., reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be. This is a mini float switch. Contains no mercury.
This right angle float switch can be arranged in any height.
Package Included: 1PC*DC 220V Liquid Water Level Sensor Right Angle Float Switch for Fish Tank
|
| Plastic Ball Float Switch |  |
Float level switch is a simple structure, easy to use level control device, it does not provide power, no complicated circuit, it has a mechanical switch than the average small size, long life and other advantages. As long as the material used in the correct shape and nature of any liquid or pressure, temperature can be used, which in the shipbuilding industry, generating equipment, petrochemical industry, food industry, water treatment equipment, dyeing and finishing industry, hydraulic machinery, etc. have been widely application. How it works: liquid level sensor magnetic reed switch by having an important and integral float, float within the magnetic material in a sealed non-magnetic metal pipe or plastic pipe set one or more magnetic reed switch, and then the catheter through a or more with magnetic float, and double-loop control using a fixed float and reed switch in the relevant position, the float rises or falls with the liquid using the ball close to the beginning of the reed contacts, resulting in open and shut action for level control or direction (when the float near the reed switch is turned on; leave the switch off) Max Contact Rating :10W Max Switching Voltage:220V Max Switching Current:0.5A Max Breakdown Voltage:220VDC Max Carry Current:1.0A Max Contact Resistance:100mohm Temperature Rating:-10~+60℃ Float Ball Material:P.P Float Body Matertal:P.P Package Included:1PC*Float level switch |
| Stainless Steel Float Switch 200mm |  |
Specification:
Material:stainless steel
Cable length:30cm Float body Length:200mm Switching voltage: max. 220VDC Switching current: max. 1.5A Carry current: max. 3.0A Feature: 1. Double float switch can be used in water tank, ponds, tanks, fish tank, and other liquid level control (drainage or water),
do the upper and lower level alarm switch. Inside contacts are use reed switch sensitivity is very high. 2. Float ball point can not move in anywhere , the float point is fixed, up and down have circlip limit. 3. The circlip moving is not use, inside reed contacts are not moving. 4. Float switch can not directly control the pump or solenoid valve, float switch inside the reed contact current, control a large load will burn. 5. Control solenoid valves, alarms to add small relays, control water pump need to add a small relay and AC contactor. (According to the pump power equipped with the corresponding AC contactor). Package Included:
1PC*Stainless Steel Float Switch Double Ball
|
| Side Mounted Float Switch |  |
The main parameters:
1. Maximum power: 60W 2. Control voltage: maximum 110V 3. Appearance size: 55*28mm 4. Insulation resistance: >100K 5. Contact impedance: <100m 6. Installation opening: 12mm 7. Working temperature: -10~60℃ 8. Working pressure: <0.6MPA 9. Lead specification: 24AWG L=350mm 10. Switch material: PP Package include：
1pc water level sensor controller |
| Normally Closed Low Pressure Float Switch |  |
Specification: Product Name : Floating Switch Contact Rating: 10W(Lowest), 50W(Highest) Switching Voltage: 100V(Lowest) 220V (Highest) Switching Current: 0.5A(Lowest) 1.5A(Highest) Breakdown Voltage: 220VDC(Lowest) 300VDC(Highest) Load Current: 1A(Lowest) 3A(Highest) Max Contact Resistance : 100mΩ Temperature Rating: -10 / +85°C Float Ball Material: P.P Float Body Material: P.P Package Included: 1 * Water Liquid Level Sensor Module Float Switch |
| PP Float Switch 100MM |  |
Features:
1. Multi-point control is possible, and the control switch can be customized with the liquid level position. 2. There is no need to provide a separate power supply with the reed switch. 3. A single unit can be used for multi-point control, and the unit price is lower than other level switches. 4. High reliability, low wiring cost and easy installation. 5.The specifications of the junction box are complete, with aluminum alloy, plastic, stainless steel and other materials. 6.PP, plastic material, can be used in strong acid and alkali places. 7. The protection level of the junction box is above IP-65. 8. This product can be applied to liquids with different densities, different acids and bases, different pressures and temperatures. |