SSD Case 2.5 to M.2 NGFF SSD Enclosure Drive External Case
brand new and
Material: plastic.
Color: as shown in pic
Warning:
Warning:
This product only support socket2 (Gen2) B+M for key for M.2 NGFF SSD,it can not support socket2 (Gen2) B+M for key PCIe x2 for M.2 NGFF SSD and socket3 (Gen3) for M for key PCIe x4 for M.2 NGFF SSD,please confirm that your SSD is fit.
This product only support socket2 (Gen2) B+M for key for M.2 NGFF SSD,it can not support socket2 (Gen2) B+M for key PCIe x2 for M.2 NGFF SSD and socket3 (Gen3) for M for key PCIe x4 for M.2 NGFF SSD,please confirm that your SSD is fit.
Features:
1.2.5" to Soket2 B+M for key for M.2 NGFF SSD adapter card.
2.The speed and other properties is not changed,only form conversion interface.
3.Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of for M.2 NGFF SSD.
4.You can connect it to desktop or laptop.
5.Transparent to the operating system and does not require any software drivers.
Specification:
1.Size:10 for 7 for 0.7 for
2.Iterfation:M.2 NGFF to 2.5"
There are three kinds of for M.2 NGFF SSD, please pay attention to identify:
1. Socket2 (Gen2) B+M for key for M.2 NGFF SSD (such as THNSNH128G8NT/ THNSNH128GDNT/MZNTD256HAGM etc models of SSD)
2. Socket2 (Gen2) B+M for key PCIe x2 for M.2 NGFF SSD (such as PX-AG128M6E PX-AG256M6E PX-AG512M6E SD6PP4M-128G SD6PP4M-256G HFS256GA6MND HFS512GA6MND HFS128GB9MND HFS256GB9MND HFS512GB9MND LGT-256B1P LGT-512B1P CX1-JB128 CX1-JB256 CX1-JB512 PT42 APP064G3FA-ATMTHNSNN128GSX7 THNSNN256GSX7 THNSNN128GVX7 THNSNN256GVX7 etc models of SSD),it there are two gaps at the hard disk interface part.
3. Socket3 (Gen3) for M for key PCIe x4 for M.2 NGFF SSD,such as XP941 (MZHPU128HCGM MZHPU512HCGL MZHPU256HCGL),SM951 PCIE-AHCI (MZHPV128HDGM MZHPV256HDGL MZHPV512HDGL),SM951 PCIE-NVME ( MZVPV128HDGM MZVPV256HDGL MZVPV512HDGL) ,PM951 PCIE-NVME ( MZFLV128HCGR MZFLV256HCHP MZFLV512HCJH MZVLV1Y0HCJH),PM961 (MZFLW1T0HMLH).950 (MZVKV256 MZVKV512),SM961 (MZVPW128HEGM MZVPW256HEGL MZVPW512HEGL),SH2280S3 SHPM2280P2 THNSN5128GPU7 THNSN5128GPU7 THNSN5256GPU7 THNSN5512GPU7 THNSN51T02DU7 etc models of SSD.it there are one for at the hard disk interface part.
Product does not work troubleshooting:
A).Please confirm interface definition is correct of your hard disk,new SSD if there is partition,open the "my computer" can'for t see the ssd, please use the Disk Manager in for Windows to the partitions or to create a new partition on the SSD.
B).Please make sure your hard drive can work normally in the original equipment,cancel the all the password set,especially the BIOS disk encryption password.
C).Upgrade computer BIOS to the latest version,revert to the default Settings.
D).Note the boot mode Settings,UFEI or Legacy.
E).You can connection USB port or connection port of your computer to test this product,please change another test if it can'for t work normally,it would exclude compatibility issues.
F).Please replace the SSD or computer test,because some computers not for the specific model or a specific brand solid-state drives.
G).If the BIOS can detect hard disk,you can to partition normal formatting of hard disk,you can install system files,but can'for t normal into the operating system after installation,this because lack of he boot record.you can rebuild the boot record or use CD-ROM installation system,at the same for time to partition for the hard disk.
Note 1 :
1. Socket 2 PCIE X2 B+M for key for M.2 NGFF SSD and SOCKET 3 PCIE X4 for M for key for M.2 NGFF SSD don'for t support!
2.The design of four fixation installation location for the adapter card,the fixeg default location in 22*80mm size place,there is a copper cylinder in a bag, if is other size of the ssd,placing copper cylinder in the appropriate place.
3. Please cancel the hard disk password if your hard drive set a password in the original computer, The other computer doesn'for t recognize the hard disk if the password not cancel.
4. Please connect the adapter card in your computer hard disk drive interface test or with USB hard disk box to test the adapter card (Do not connect USB interface test if Your hard disk current is greater than 1.2A,because power supply current is 500 of USB 2.0 port power supply current is 900 of USB 3.0 port),if the SSD with a test can'for t identify by computer,change other test to check the SSD,If still can'for t identify please try to replace a computer,this operation can be ruled out compatibility problems.
5. for OS and some digital camera system use disk format can'for t for system,new SSD if there is partition,open the "my computer" can'for t see the ssd, please use the Disk Manager in for Windows to the partitions or to create a new partition on the SSD.
6. This product is being improved unceasingly, like has the change,not separate informs even slightly.Pictures for reference only, subject to our available products.
7.Please allow 1-2mm errors due to manual measurement
8.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!