SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen, mini and portable design. It is a very handy & smart analyzer for electronics engineer, amateur radio operators, beginner or radio diy beginner.
Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen, 1 x 32GB Card. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the nanovna-h4 can be updated by the user. New versions of the firmware needed pls tell us for download link.
You can use a MicroSD card to save measurement data in SNP format or to save screenshots in BMP format. MicroSD card uses SPI mode and only supports smaller than 32GB and formatted with FAT or FAT32.
In addition, different from old version, the date and time of vna can be display, which is convenient for you to further record and save data.
|
|
|
---|---|---|
4.0 inch Touch ScreenEquiped with a 4.0 inch touch screen, you can operate the device by the screen or the multi-functional switch one the top. |
1950 mA-h Large Battery4.0 inch screen also brings larger battery, NanoVNA-H4 comes with a 1950mA-h rechargeable battery, continuous working time up to 8 hours |
Improved AccuracyThe metal shield is designed to reduce the external interference and improve the measurement accuracy.Use strong and secure power supply at the same time.Enhanced performance in all aspects |
|
|
|
---|---|---|
New Updated 4.3 VersionNanoVNA-H4 is now updated to 4.3 version, it covers frequency up to 1.5Ghz, and the battery information will also be displayed on the screen. |
PC & Android Cellphone ControlCustomized PC & cellphone app make it easier to operate the device. We can export Touchstone (snp) files for various radio design and simulation software through PC software |
Compact Portable & PowerfulThis Antenna Analyzer is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld.The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters (you need to manually replace the transceiver port wiring) |
Measurement frequency | 10KHz -1.5GHz |
RF output | 0dbm (±2dbm) |
Measurement range | 70dB (50kHz-300MHz),60dB (300M-900MHz), 40dB(0.9G-1.5GHz) |
Port SWR | < 1.1 |
Display | 4 inch TFT (320 x 480) |
USB interface | Type-C |
Communication mode | CDC (serial) |
Rechargeable battery | Built-in 1950mA-h battery |
Number of scanning points | 101 (fixed) |
Version information | Latest 4.3 Version |
After-service Time | 1 Year |
Firmware Update | Supported |