• Causes of fuel pump failure
  •   Fuel pumps typically operate for seven to ten years before failure. Premature failures are most commonly caused by one of the following reasons:
    • Excessive Hot/Cold Environments
    • Contaminated fuel
    • Excessively running a vehicle on a near empty tank which prevents the pump from being fully submerged causing it to overheat
     
  •  
  • Prior to Replacing Pump, check:
  •  

    • Electric Fuel Pump Module For Saab 9-3 L6 2.0L 2003-2009 2010 2011 E8489M

    Causes of fuel pump failure


    Fuel pumps typically operate for seven to ten years before failure. Premature failures are most commonly caused by one of the following reasons:

    • Excessive Hot/Cold Environments
    • Contaminated fuel
    • Excessively running a vehicle on a near empty tank which prevents the pump from being fully submerged causing it to overheat

     

     

    Prior to Replacing Pump, check:

     

    • Fuel Pump Fuse(s)
    • Fuel Pump Relay
    • Voltage at the Pump - test for bad wiring
    • Voltage drop test - corroded connector, bad wiring
    • Fuel System Pressure - test for pump pressure being outside accepted rang

     

     

    Insrallation Guide

     

    • Make Sure Fits

             Check related fuel system components such as fuel filter, relays, vehicle wiring and connectors chassis grounds, fuel perssure regulator and fuel itself.

    • Relieve System Fuel Pressure
    • Disconnect the Battery

             Disconnect negative battery cable to reduce possibility of sparks or engine staring.

    • Empty Fuel the Battery

             Drain fuel into approved containers and dispose of per local codes or regulation.

    • Remove Fuel Tank form Vehice
    • Remove Old Fuel Pump
    • Clean inside of Fuel Pump
    • Inspect/Replace Vehice Wiring/Hoses as Needed
    • Install New Fuel Pump and Strainer
    • Install New Tank Seak (if applicable)
    • Re-install Fuel Tank
    • Replace Fuel Tank
    • Fill GAS Tank with Clean Fuel

             Clean fuel is critical to ensure proper fuel pump operation

    • Start Enging and Check for Leaks or Problems

             Reconnect battery cable key may need to be cycled on and off several time ti build prooer fuel system pressure



    Payment

    We only accept payment through PayPal. 

    Shipping

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.

    Returns

    All of our brand new items come with a 60-Days money-back guarantee.

    Contact Us

    Any question, please contact us by email on working days.

    Warning

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    Best Sales
    Newly Listed
    Terms & Contact
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Electric Fuel Pump Module For Saab 9-3 L6 2.0L 2003-2009 2010 2011 E8489M

    Causes of fuel pump failure


    Fuel pumps typically operate for seven to ten years before failure. Premature failures are most commonly caused by one of the following reasons:

    • Excessive Hot/Cold Environments
    • Contaminated fuel
    • Excessively running a vehicle on a near empty tank which prevents the pump from being fully submerged causing it to overheat

     

     

    Prior to Replacing Pump, check:

     

    • Fuel Pump Fuse(s)
    • Fuel Pump Relay
    • Voltage at the Pump - test for bad wiring
    • Voltage drop test - corroded connector, bad wiring
    • Fuel System Pressure - test for pump pressure being outside accepted rang

     

     

    Insrallation Guide

     

    • Make Sure Fits

             Check related fuel system components such as fuel filter, relays, vehicle wiring and connectors chassis grounds, fuel perssure regulator and fuel itself.

    • Relieve System Fuel Pressure
    • Disconnect the Battery

             Disconnect negative battery cable to reduce possibility of sparks or engine staring.

    • Empty Fuel the Battery

             Drain fuel into approved containers and dispose of per local codes or regulation.

    • Remove Fuel Tank form Vehice
    • Remove Old Fuel Pump
    • Clean inside of Fuel Pump
    • Inspect/Replace Vehice Wiring/Hoses as Needed
    • Install New Fuel Pump and Strainer
    • Install New Tank Seak (if applicable)
    • Re-install Fuel Tank
    • Replace Fuel Tank
    • Fill GAS Tank with Clean Fuel

             Clean fuel is critical to ensure proper fuel pump operation

    • Start Enging and Check for Leaks or Problems

             Reconnect battery cable key may need to be cycled on and off several time ti build prooer fuel system pressure



    We only accept payment through PayPal. 

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.

    All of our brand new items come with a 60-Days money-back guarantee.

    Any question, please contact us by email on working days.

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


    All rights reserved.