LMMDB

22pcs Pump Held Brake Bleeder Vacuum Hand Car Tools Tester Bleed kit Motorbike

Images



22pcs Brake Bleeder Tester Tool Kit Vacuum Pump Motorcycle Bleeding Hand Pump

 

Application:

universally applicable for almost all cars

Suitable for checking pressure and vacuum systems such as: Checking charging pressure, vacuum solenoid valves, tank ventilation, MAP sensors, etc.

Thanks to extensive accessories (accessory caps and inserts) can also be used as brake vents

Print display range: +0 to +3 bar

Vacuum display range: -0 to -0.8 bar

63.5 mm pressure/ vacuum manometer

 

Included in the scope of delivery: 

long hose: outer diameter: 9.5mm, inner diameter: 6mm, length: 60cm
including 2 pieces 120 ml vent container
Hoses each with a length of 90, 75, 60 mm and 2 pieces 550 mm
Adapter 90° Vent nipple 2 pieces 7.5 mm, 1 piece 6 mm inner diameter
Adapter cone 8 pieces in different diameters and lengths
Adapter 1 piece from 7 to 5 mm diameter
Adapter 1 piece diameter 35 mm
1x Plastic storage case

 

Specifications:

1xBrake vent pressure pump vacuum pump brake vent pressure tester hand car

Product type: Car brake vent
Material: plastic, metal
Installation: universal for most cars

 

Venting:

1. Make sure that the storage tank from the main brake cylinder is full and the container is open.

2. Connect the 50 mm long plastic hose to the lid of the vent container and place the lid on the vent container,

the short hose must now be in the container.

3. Connect the other 50 mm long hose

4. Connect one end of the long hose to the vent container and the other end with a matching "pipe" for the brake caliper vent nipple.

5. When venting, follow these manufacturer's guidelines. Generally, venting is in the following order:

A. Start with the wheel cylinder located the farthest away from the main brake cylinder, then the one at 2 farthest away, etc. For left-hand-driving vehicles

the order is usually: rear right, back left, front right and last front left.

B. Place the vent pipe on the vent nipple of the wheel brake cylinder or brake caliper.

C. Pump 10-15 times until a vacuum is created.

D. Open the vent nipple until the brake fluid flows through the hose without bubbles. NOTE: Operation C and D may repeat several times

must be made.

6. Check the brake fluid level in the reservoir before venting the next wheel brake cylinder or caliper.

7. Important: Finally check the brake fluid level, fill it up if necessary.

 

Benefits: 

- Condition: brand new

- Withdrawal Guaranteed

- Manufacturer's warranty:24 months warranty

- ready to ship

 

Notes: 

- It is an aftermarket tool, it serves as a replacement of the original tool.

- Instructions are not encased. We recommend a professional installation.

- If you have any questions, please feel free to contact us at any time.



GGT1544V-Z2
GGT1544V-Z2
GGT1544V-Z2

01.Will this fit my car?

We have used the eBay compatibility list as a guide for buyers to use, but the eBay data system is not accurate and incomplete sometimes. Please make sure you have read through the whole listing and paid attention to “note” and “notice”. If there is any uncertain, please use the eBay message to check with our sales first.

02.What payment methods do you accept?

We currently only accept payment via PayPal. You can also use PayPal as a guest and pay using a debit or credit card.

03.When will my order be dispatched?

We will arrange the shipment in 1-3 business day after the payment is cleared. The tracking number will be updated on eBay in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.

04.Can I pick it up at the warehouse?

Sorry no. Pick up service is not available.

05.Can I amend my order?

Sorry no. Once the payment is cleared, we cannot amend any item(s), quantities, or add or remove items. We are also unable to change the delivery address. Therefore, please double check all the order information before making payment.

06.What do I do if I have not received my order?

Please simply contact us via eBay messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.

07.What do I do if my product is faulty?

Please simply contact us via eBay messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.

Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. maXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. maXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts.

Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system.

Racing Team

maXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service.

Partnership

MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc.

Warehouse

MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany.

01.

We will ship your order in one business day once the payment is cleared.

02.

All packages will be collected by our courier at 8:00 am BST Monday to Friday.

03.

For payment after 8:00 am BST, the package must be shipped next business day 8:00 am BST.

04.

The tracking number will be entered on eBay within 24 hours after shipment.

05.

We will only ship the item to the shipping address verified by PayPal. Make sure your shipping address is the same with PayPal's.

06.

Import Tax: We do not cover any import duty or tax. The customer should be responsible for the import tax.

07.

We will ship all of our items via DPD and DHL. The estimated delivery time is around 3-6 working days for most areas in Italy.

FROM TO SERVICE Estimated Delivery Time
Australia Australia Toll IPEC or Au PosteParcel 2-5 business days
Outside of Australia TNT 4-8 business days

01.

All MaXpeedingrods products have 24 months warranty (unless otherwise stated). All the warranty only covers manufacturing defect(material or workmanship ). Any issue caused by physical damage, incorrect installation and usage, modification, negligence, etc will be out of warranty.

02.

We aim to provide you the good buying experience, 30 days return policy is offered in our store. You may return or exchange any product within 30 days, as long as the item is in resalable condition and is returned in its original packaging. If the product is damaged during or after installation, a refund or credit will not be given. You will be responsible for the original and return shipping charges and a restocking fee of 15%. This also applies to orders cancelled during transit.

03.

The Refund/Exchange will not include postage/eBay costs. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. Whatever your return reason or exchange is, please contact us for return instruction and return authorization number first; Our customer service team will provide you the professional solution and solve your problem promptly. Our goal is for you to be happy with your purchase.

  • 22pcs Pump Held Brake Bleeder Vacuum Hand Car Tools Tester Bleed kit Motorbike

    Images



    22pcs Brake Bleeder Tester Tool Kit Vacuum Pump Motorcycle Bleeding Hand Pump

     

    Application:

    universally applicable for almost all cars

    Suitable for checking pressure and vacuum systems such as: Checking charging pressure, vacuum solenoid valves, tank ventilation, MAP sensors, etc.

    Thanks to extensive accessories (accessory caps and inserts) can also be used as brake vents

    Print display range: +0 to +3 bar

    Vacuum display range: -0 to -0.8 bar

    63.5 mm pressure/ vacuum manometer

     

    Included in the scope of delivery: 

    long hose: outer diameter: 9.5mm, inner diameter: 6mm, length: 60cm
    including 2 pieces 120 ml vent container
    Hoses each with a length of 90, 75, 60 mm and 2 pieces 550 mm
    Adapter 90° Vent nipple 2 pieces 7.5 mm, 1 piece 6 mm inner diameter
    Adapter cone 8 pieces in different diameters and lengths
    Adapter 1 piece from 7 to 5 mm diameter
    Adapter 1 piece diameter 35 mm
    1x Plastic storage case

     

    Specifications:

    1xBrake vent pressure pump vacuum pump brake vent pressure tester hand car

    Product type: Car brake vent
    Material: plastic, metal
    Installation: universal for most cars

     

    Venting:

    1. Make sure that the storage tank from the main brake cylinder is full and the container is open.

    2. Connect the 50 mm long plastic hose to the lid of the vent container and place the lid on the vent container,

    the short hose must now be in the container.

    3. Connect the other 50 mm long hose

    4. Connect one end of the long hose to the vent container and the other end with a matching "pipe" for the brake caliper vent nipple.

    5. When venting, follow these manufacturer's guidelines. Generally, venting is in the following order:

    A. Start with the wheel cylinder located the farthest away from the main brake cylinder, then the one at 2 farthest away, etc. For left-hand-driving vehicles

    the order is usually: rear right, back left, front right and last front left.

    B. Place the vent pipe on the vent nipple of the wheel brake cylinder or brake caliper.

    C. Pump 10-15 times until a vacuum is created.

    D. Open the vent nipple until the brake fluid flows through the hose without bubbles. NOTE: Operation C and D may repeat several times

    must be made.

    6. Check the brake fluid level in the reservoir before venting the next wheel brake cylinder or caliper.

    7. Important: Finally check the brake fluid level, fill it up if necessary.

     

    Benefits: 

    - Condition: brand new

    - Withdrawal Guaranteed

    - Manufacturer's warranty:24 months warranty

    - ready to ship

     

    Notes: 

    - It is an aftermarket tool, it serves as a replacement of the original tool.

    - Instructions are not encased. We recommend a professional installation.

    - If you have any questions, please feel free to contact us at any time.



  • 01.Will this fit my car?

    We have used the eBay compatibility list as a guide for buyers to use, but the eBay data system is not accurate and incomplete sometimes. Please make sure you have read through the whole listing and paid attention to “note” and “notice”. If there is any uncertain, please use the eBay message to check with our sales first.

    02.What payment methods do you accept?

    We currently only accept payment via PayPal. You can also use PayPal as a guest and pay using a debit or credit card.

    03.When will my order be dispatched?

    We will arrange the shipment in 1-3 business day after the payment is cleared. The tracking number will be updated on eBay in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.

    04.Can I pick it up at the warehouse?

    Sorry no. Pick up service is not available.

    05.Can I amend my order?

    Sorry no. Once the payment is cleared, we cannot amend any item(s), quantities, or add or remove items. We are also unable to change the delivery address. Therefore, please double check all the order information before making payment.

    06.What do I do if I have not received my order?

    Please simply contact us via eBay messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.

    07.What do I do if my product is faulty?

    Please simply contact us via eBay messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.