AC Compressors:

Compressors are the heart of the A/C system, with a heavy responsibility to pump A/C refrigerant throughout the automobile’s A/C system. We take the upmost care when developing new compressors. We always make sure that our new compressors meet exact specifications, When you purchase a new compressor from Topcn, you are receiving a high quality product at price that is very affordable.

Feature:

• 【PREMIUM ALUMINUM MATERIAL】- This ac air compressor is a replacement compressor and clutch. Its main body is made of high-strength aluminum material, which is durable, rigid, and wearable. It will not crack, break, or leak. Such high-quality ensures a long-time use for each compressor kit.
• 【STRONG COOLING FUNCTION】- The auto ac compressor can provide sufficient pressure, which increases power force and decreases engine load. It dramatically improves the cooling function: features as high and stable efficiency, safety, and reliability.
• 【LOW NOISE & LOW FUEL CONSUMPTION】- AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.
• 【FULLY TESTED & EASY INSTALLATION】- The ac compressor clutch has been examined and tested carefully before its delivery. And the kit without refrigeration oil inside, be aware of it when starting your installation and replacement. If you need to add oil after a long time use, please add pure refrigerant, and should not be added to too much, 70-80% is appropriate.

Fit For:

For 2006-2007 For bmw 325i 2.5L
For 2006-2006 For bmw 325i 3.0L
For 2006-2006 For bmw 325xi 3.0L
For 2007-2007 For bmw 328i 3.0L
For 2007-2007 For bmw 328xi 3.0LTo 03/01/2007
For 2006-2007 For bmw 330i 3.0L
For 2006-2006 For bmw 330xi 3.0L
For 2007-2008 For bmw Alpina B7 4.4L
For 2008-2013 For bmw M3 4.0L
For 2006-2010 For bmw M5 5.0L
For 2006-2010 For bmw M6 5.0L
For 2009-2010 For bmw Z4 3.0L

Part Number

Austin Baker：10363031
For bmw：64522151495
For bmw：64526918753
For bmw：64526925721
For bmw：64526956716
Denso Automotive Systems：4710483
Denso Automotive Systems：4710532
Denso Automotive Systems：4711532
Four Seasons：97391
Four Seasons：98391
Omega：2021736R
Omega：2021871AM
Panafrio：2015135
Ranshu：140350
Ranshu：140350NEW
Trad Automotive：C1614R
Trad Automotive：C1960
Trad Automotive：C1960R
Trad Automotive：C2032
Trad Automotive：C2032R

Note:

Please make sure the installation site is clean. Or it will cause operating obstruction, making the compressor's temperature very high, and the belt on the clutch may melt.
But you need to add the refrigerant. Please add it to 70-80%. Try not to fill it up. There may be noise if the refrigerant is added too much.
 

Installation Steps:

1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil-based A/C flush. The valve must be removed from the expansion valve system before the evaporator can be flushed.
3. Flush evaporators from inlet to outlet.
4. Install the new receiver drier or accumulator and a new expansion valve or orifice tube.
5. Next, install the new or remanufactured A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread it more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.

Package Included:

As the picture show