Features:
* Version 1.10d adds the following functions on the basis of 1.10c:
1, the cancellation of the audio encoder short press to exit the menu function, in the menu interface does not affect the original function, you can still adjust the volume
and other parameters or switch items, only with the frequency encoder short press to exit the menu.
2、In the menu interface, change to use the frequency encoder to adjust the project parameters.
3、Menu adjustment, increase the reduction of electromagnetic interference control (EMI Reduction), WF GAMMA mode settings (WF GAMMA),
remove the LCD sleep after the screen off settings (SLEEP TIME).
*Improved the graphical display of the spectrum
*Improved algorithm optimisation to increase display speed
*Added the ability to determine the type of activation - only a or three clicks on a single machine. a-touch activation if PD15 ( pin 7 of the reserved field) is on.
If this pin is closed to the common wire, it is opened with three clicks
*Improved HARD menu
*Improved battery indication - voltage shown at top of picture
*Added control of user device function using discrete signal PD14 (pin 8 of reserved field)
*Button for switching audio output has been added to the HARD menu, he replicates the audio output switching. Produced at the request of the user.
*SAM-U and SAM-L modes have been added
- The button for switching audio output has been added to the HARD menu. It copies the audio output switching. Produced at the request of the user.
* Advantages:
1. 3.5 inch capacitive screen
2. Adopts a sound generating unit with 2 chambers, the speaker has its own chamber and the bass sound quality is very full
*for DSP receiver.
- Capacitive touchscreen
- Flash memory via USB cable
- Default frequency range: 50KHz-200MHz
-Demodulation modes: AM, SSB, NFM, WFM
*Reception with built-in or external antenna was developed to improve HF reception with antennas and an add-on board with a source follower.
This board will be built into the standard receiver design.
*CAT, IQ and audio can be transmitted by connecting to a computer via USB.
* 160 kHz span for scalability;
* SMA female antenna socket;
Specifications:
*Principle: The radio is built on the principle of the function is determined by the loaded software;
*All types of analogue modulation: AM, SSB, NFM, WFM;
*Powerful features: variable filter width, adaptive noise suppressor, threshold noise suppressor for noise canceller, AGC, equaliser;
*Using a cheap but full-featured chip: msi001;
*Using powerful stm32h743 with clock frequency: 480MHz;
*Display touch screen: 3.5 inch IPS;
*With or without built-in UHF: yes;
*Controls: 2; encoder with buttons and touch screen;
* Power supply: external TYPE-C (Huawei mobile phon e) interface or battery (battery not included) power supply
*Consumption: 300mA when listening to headphon es;
*Dynamic blocking range: around 85dB due to the characteristics of the msi001 chip used.
*With or without backlight: with backlight
* Main board size: 100 x 70mm (excluding connector size).
*Built-in battery:2500 mAh
Package Included:
1 x Receiver
1 x type-c charging cable
1 x Antenna adapter
2 x SMA to M holder (SMA male to UHF female)
1 x Screen cleaning cloth
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
