3500W Durchlauferhitzer Elektronisch Wasserkocher Geeignet Für Hotel DHL DE 220V
Please read all of the instructions thoroughly before installing and operating this water heater. It will help you to master the use methods quickly and you can taste the enjoyment which top-quality life brings to you.
Our products have passed the International Quality System ISO9001 and they are in accordance with:IEC 60335-1:2004(Ed4.1) & IEC60335-2-35:2002,and other related standards.
Note
This small kitchen treasure power is only 3500W, mainly suitable for hand washing dishes, if the water temperature is not enough, you can adjust the water pressure.
This small kitchen treasure power is only 3500W, mainly suitable for hand washing dishes, if the water temperature is not enough, you can adjust the water pressure.
Note:
1.You need buy the faucet that you like to install with this water heater.
2.Please get through the water before switching on the power at first use.
Highlights and functions :
1.Instant hot water, high heating efficiency, bears high water pressure.
2.Multiple safety protections for dry heating, overheating
3.Pure resistance load, no inductance, no electromagnetic radiation., environmental protection with no pollution.
4.Energy saving, start heating while the water in, it is hardly lose any energy and the heating efficiency is up to 96%.
5.Adopt advanced water pressure induction flow switch, no water no heating, bear dry heating.
6.Optional power levels, can meet your seasons requirements, save electricity and economical for life.
7.Easily to use, no need to reserve water, pre-heating, keep warm or wait.
8.Suitable for where need hot water such as household, hotel, saloon, office, school and hospital .
9.Startup with very low water pressure.
Highlights and functions :
1.Instant hot water, high heating efficiency, bears high water pressure.
2.Multiple safety protections for dry heating, overheating
3.Pure resistance load, no inductance, no electromagnetic radiation., environmental protection with no pollution.
4.Energy saving, start heating while the water in, it is hardly lose any energy and the heating efficiency is up to 96%.
5.Adopt advanced water pressure induction flow switch, no water no heating, bear dry heating.
6.Optional power levels, can meet your seasons requirements, save electricity and economical for life.
7.Easily to use, no need to reserve water, pre-heating, keep warm or wait.
8.Suitable for where need hot water such as household, hotel, saloon, office, school and hospital .
9.Startup with very low water pressure.
Model Introduction:
Note：
1.The first capital letter of the product code stand for the business division.
2.The second capital letter of the product code stand for the product category..
3. The third and fourth digits stand for the development time of the product, to distinguish different product from 01~99
4.The fifth capital letter of the product code stand for the difference of the design change,from A~Z.
5.The character in front of the symbol "-" is short for product coding, the character after the "-" is a product design parameters.
Technology parameter and Detail
Rated voltage：AC220V
Rated frequency：50Hz/60 Hz
Rated power：3500W
Fit water pressure：0．1MPa-0．6MPa
Waterproofing rate： IPX4
Switch on flow rate ：≥1.5L/MIN
Minimum water resistance when 15℃： ≥1300Ω·cm
Electric shock protection class：Ⅰ
Heating system：Bare heating element
Rated water pressure：0MPa(Wenn der Wasserdruck nicht ausreicht, kann dies dazu führen, dass kein heißes Wasser vorhanden ist. Bitte kaufen Sie mit Vorsicht.)
Start-up pressure：0.05MPa
Temperature range ：0-50℃
Diameter of cable：3×1.5mm2
Water connection :G 3/8 "
Safety Note:
1. 1, The water heater must connect with earthing secured; it’s forbidden dismantling the earthing device.
2. It is forbidden to install and use the water heater invertedly .
3. The rated current of the power switch can not be less than the rated current of the water heater.
4. The device must be filled with water before power on when use for the first time or discontinued for a long time.
5. If the water in the device may be freezing, do not power on before confirm that the ice in the water heater has been thawy.
6. Shut off the power and turn off the inlet valve when you don't use the water heater.
7. If the power cord is damaged, it must be changed by the manufacturer or maintenance department or the professional person .
8. Shut off the power when the water heater is blocked and clean the inlet filter and outlet shower.
9. The outlet should not be connected to any faucet or connector which is not recommended.
2.The second capital letter of the product code stand for the product category..
3. The third and fourth digits stand for the development time of the product, to distinguish different product from 01~99
4.The fifth capital letter of the product code stand for the difference of the design change,from A~Z.
5.The character in front of the symbol "-" is short for product coding, the character after the "-" is a product design parameters.
Technology parameter and Detail
Rated voltage：AC220V
Rated frequency：50Hz/60 Hz
Rated power：3500W
Fit water pressure：0．1MPa-0．6MPa
Waterproofing rate： IPX4
Switch on flow rate ：≥1.5L/MIN
Minimum water resistance when 15℃： ≥1300Ω·cm
Electric shock protection class：Ⅰ
Heating system：Bare heating element
Rated water pressure：0MPa(Wenn der Wasserdruck nicht ausreicht, kann dies dazu führen, dass kein heißes Wasser vorhanden ist. Bitte kaufen Sie mit Vorsicht.)
Start-up pressure：0.05MPa
Temperature range ：0-50℃
Diameter of cable：3×1.5mm2
Water connection :G 3/8 "
Safety Note:
1. 1, The water heater must connect with earthing secured; it’s forbidden dismantling the earthing device.
2. It is forbidden to install and use the water heater invertedly .
3. The rated current of the power switch can not be less than the rated current of the water heater.
4. The device must be filled with water before power on when use for the first time or discontinued for a long time.
5. If the water in the device may be freezing, do not power on before confirm that the ice in the water heater has been thawy.
6. Shut off the power and turn off the inlet valve when you don't use the water heater.
7. If the power cord is damaged, it must be changed by the manufacturer or maintenance department or the professional person .
8. Shut off the power when the water heater is blocked and clean the inlet filter and outlet shower.
9. The outlet should not be connected to any faucet or connector which is not recommended.
10. When the water temperature is 15 ℃, the water resistivity should be not less than 1300 Ω * cm.
Am 24.06.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: