Electric Bike Left Side Drive Motor Kit Mountain Bike Conversion Custom 250W 24V

 

Important NOTE:

This item is for the bike that uses the hub diameter less than 36mm.

This item doesn't include battery or charger.

This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel.

Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance.

The twist kit includes:

1. 1x 250W 24V brush motor with freewheel

2. 1x Chain

3. 1x Customized sprocket & components

4. 1x Motor controller

5. 1x Mounting plate + bolts

6. 1x Twist throttle (with battery indicator & key switch)

The thumb kit includes:

1. 1x 250W 24V brush motor with freewheel

2. 1x Chain

3. 1x Customized sprocket & components

4. 1x Motor controller

5. 1x Mounting plate + bolts

6. 1x Wuxing thumb throttle (with battery indicator & switch button)
 
Wichtige Notiz:
Dieser Artikel ist für ein Fahrrad mit einem Nabendurchmesser von weniger als 50 mm.
Dieser Artikel enthält keine Batterie oder Ladegerät.

Dies ist unser neuestes Kit für Elektro-Fahrrad, dieses Kit montiert das Kettenrad an den Radspeichen, so dass es am meisten Fahrradrad passt.
Freilauf des Motors verwenden Wenn sich das Rad dreht, dreht sich der Motor nicht wie bei einem normalen Fahrrad. Dies kann den Widerstand verringern.


Das Twist-Kit beinhaltet:
1. 1x 250W 24V Bürstenmotor mit Freilauf
2. 1x Kette
3. 1x Customized Kettenrad und Komponenten
4. 1x Motorsteuerung
5. 1x Montageplatte + Schrauben
6. 1x Twist Gas (mit Batterieanzeige und Schlüsselschalter)

Das Daumen-Kit enthält:
1. 1x 250W 24V Bürstenmotor mit Freilauf
2. 1x Kette
3. 1x Customized Kettenrad und Komponenten
4. 1x Motorsteuerung
5. 1x Montageplatte + Schrauben
6. 1x Wuxing Daumen Gas (mit Batterieanzeige und Schalter)
Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor.
Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor.
Welcome to the ryxtopyyyy !

We are committed to providing customers with better and more favorable products ! If you have any questions, please feel free to contact us !

Thank you for your support !
PushAuction

DataCaciques