Feature:
Part Number:
7-3997 HO3030158 SBC3997 73997,80110T0AA01
Fitment For:
For honda CR-V 2012-2016 2.4L L4
Package includes
1x Condenser
(As shown in the picture)
Safety Tip
The AC condenser system is under very high pressure, up to several hundred PSI when operating, and thus you can be seriously injured.AC condenser of the replace would be best left to the professionals. Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary.
Replace Steps
1.Locate your A/C condenser. Inspect the condenser for cracks that can lead to leaking.
2.Recover the refrigerant (Discharge the AC system). This will need to be done with a recovery machine. If the Freon has already leaked out you will not need to do this.
3.Remove any grilles, supports, lock braces to gain access to the condenser.
4.Remove the condenser's refrigerant lines. Remove the condenser mounting bolts. Remove the condenser.
5.Install a new condenser making sure any rubber cushions Fit For properly on the condenser assembly.
6.Pour a small amount of compressor oil into the line fittings. Reconnect the A/C lines. Replace all O-rings. Re-install any parts that were removed in order to gain access to the condenser.
7.Evacuate all remaining refrigerant using a specific AC machine that pulls a vacuum on the system. Hold the vacuum for 10 minutes to check for leaks.
8.Recharge the A/C system with the recommended type and amount of refrigerant. Each vehicle takes a different amount of refrigerant.
9.Test A/C system by measuring the temperature coming out of vents inside the vehicle.