Welcome to our store!
To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.
-
Choose a vehicle from the "My Garage" list. Or
-
Enter your vehicle's details with Year / Make / Model / Trim / Engine. Or
-
Contact us: Ask us for double check.
Package Contents
1 x FUEL PUMP MODULE ASSEMBLY
Application For:
For 2003-2004 Ford Crown Victoria Grand Marquis
Advantages of the item
1. Difficulty in starting a cold car
2. The car with petrol
3. The idle dithering
4. Easy to stall while driving
5. Increased fuel consumption
6. Slow acceleration, obvious lack of power.
How to Check Your Fuel Pump?
Step1
Check the fuel pump fuse. Often, it's not the pump itself that fails to function, but the power that supplies it. Check in your owner's manual for the location of the fuse box, then find the fuse that corresponds to the fuel pump. Pull it out and inspect it for signs of failure. If the fuse is blown, it will be broken or burned. If it looks good, check the rest of the fuses related to the fuel system for signs of being blown and replace them, if necessary. If no fuses are blown, have a helper turn the key while you listen for fuel pump relay clicking on.
Step2
Check the voltage at the pump itself. Just because you're getting juice from the circuit doesn't mean that it's getting to the pump itself, which makes it important to check the voltage there as well. Check out your vehicle's service manual to find out where to check and the proper procedure for checking it.
Test for source voltage, to determine whether or not the good charge that's leaving the fuse is getting to the pump. If no power is making it to the fuel pump, then check the fuel pump relay circuit. You could have a bad relay.
Step3
Perform a drop test using a voltmeter. Check to make sure that the power wire shows the full voltage and the grounding wire shows that it's grounded properly. If this electrical test reveals nothing, it's likely that your fuel pump is the problem and it will need to be replaced, though you can check more thoroughly by completing an additional pressure test.
Notes:
Due to the complexity of installing and diagnosing a fuel pump, it’s highly suggested it should be operated by a certified technician.
Please check fitment & notes first. Feel free to contact us about Warranty Terms & Return Policy to avoid any hassle.
How to replace a fuel pump? In 96 Jeep Cherokee for example
Step 1
Disconnect the negative battery cable with a wrench.
Step 2
Remove the gas cap.
Step 3
Locate the test port and place towels around the port. Use a small screwdriver to press against the port and relieve the fuel pressure. If the vehicle does not have a test port, place towels around the end of the fuel rail and disconnect the fuel line coming into the fuel rail. This will also relieve pressure in the system.
Step 4
Disconnect the hoses running to and from the fuel pump and the electrical connections running to the fuel pump and the attached fuel sending unit.
Step 5
Turn the ring holding the fuel pump and fuel sending unit counterclockwise until it can be removed from the outer retaining ring.
Step 6
Remove the mounting bracket and place it onto the new fuel pump. Disconnect the wires from the old fuel pump and attach them to the new fuel pump. Install the lock ring onto the new pump.
Step 7
Place the new pump back into the fuel tank and turn the outer ring clockwise until it locks into the inner ring.
Step 8
Attach the electrical connections and hoses to the new fuel pump.
Step 9
Install the fuel line at the end of the fuel rail if you've disconnected the line in place of using the test port to relieve the fuel system pressure.
Step 10
Replace the gas cap.
Connect the negative battery cable.
| Item Specifics | |
|---|---|
| UPC | Does not apply |
| Brand | ZoneMotive |
| Manufacturer Part Number | C10782493S |
| Weight | 5 LB |
| Fitment Type | Direct Replacement |
| Manufacturer Warranty | 1 Year |
| Mounting Hardware Included | No |
| Interchange Part Number | HK11090003CP |
| Custom Bundle | No |
| Modified Item | No |
| Color | White |
| Inlet Type | Strainer |
| Quantity | 1 |
| Packaging Type | Box |
| Fuel Pump Type | Electrical |
| Compatible Fuel | Gas |
| PSI | 85-100 |
| Gallons Per Hour (GPH) | 65-75 |
| Placement on Vehicle | Rear |
| Outlet Type | Quick Connect |
| Outlet Size | 3/8 |
| Terminal Type | Round |
| Terminal Gender | Male |
| Other Part Number | P76025M,HP10233 |
| Connector Gender | Female |
| Internal Or External Strainer | Internal |
| Superseded Part Number | 67249,67174 |
About Us:
We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Paypal only.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
30-day free return provided.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
