welcome
Stainless Grain Mill Barley Grinder Malt Crusher Grain Milling + Hopper Silver
Reminder:it Can't Grind.
note: This Item Cannot Grind Soybeans.Condition: New and Good Quality
Color: Silver
Type: Grain Crusher
2 Rollers: Stainless Steel
Grinder Housing: Aluminum
Hoppers: Stainless Steel
Speed:8lbs/Min(3.6kg/Min)
Total Height: 260mm(10.2")
Hopper Dimensions at Top: 220 X 210mm((8.7" X 8.3")
Footprint Size of Grinder: 140 X 80mm(9.4" X 3.1")
Roller Dimension: 76 X 150 X 50mm(3" X 6" X 2")
Single Roller: Ø 38 X 150mm (1.5" X 6")
The Ribbed Rollers Are Adjustable at Both Ends of the Slot.
Roller Adjustable Approx. 0.1 - 2.5 Mm
With 2 Aluminum Bars
Crank Handle: 120mm(4.7")
New 2 Rollers Malt Mill,Grain Mill,Home Brew Mill,Barley Crusher Homebrew
Features:
Width and Roller Diameter Is Optimized for Use with Power Drill
Adjustable Rollers at Both Ends to Give Uniform Crush
12 Tpi Knurl to Efficiently Pull Grain Through Rollers While Leaving Hull Intact to Form an Excellent Filter Bed for Sparging
6" Long Adjustable Gap
Fully Adjustable Mill
0.060" Fixed Primary Gap, 0-0.065" Fully-adjustable Secondary Gap
Dual Eccentric Adjusters Built from Stainless Steel for No Galling
8 Lbs / Minute Is Average Throughput
6" X 1.5" Diameter Stainless Steel Rollers
Crankshaft Can Be Turned Clockwise or Counterclockwise
Durable Alloy Frame
Sae 841 Oil Impregnated Bronze Bushings
Heavy-duty Two-roller Mill with Adjustable Secondary Gap-spacing
Integral Drive Shaft and Axles
Mill Can Be Hand-cranked or Motorized with a Corded Electric Drill
You Will Need to Supply or Build a Base
This Grain Mill Is Constructed Using Materials That Will Last a Lifetime. Cold Rolled Steel for the Rollers, and Aluminum for Body and Stainless Steel Hopper and Oil Impregnated Brass Bushings. the Grain Mill Is Professional in Grinding Barley, Wheat and Other Cereals. It Is Provided with Adjustable 2 Rollers Which Can Be Crushed Cereal Well and Peeled Shell off Perfectly, so As to Be Good for Brewing Beer in Future. the 2 Rollers Design Has the Main Advantage That It Draws the Grain Better and Gives Improved Throughput.
This Equipment Is Perfect for Large Batches and High Efficiency Milling. with Two Rollers, All Your Grain Will Be Crushed Twice in One Cycle. the Crush Is Through the Fixed Gap Between the Top Two Rollers. the Initial Pass Slightly Flattens the Grain, Getting It Ready for the Next Crush That Breaks Apart the Grains and Loosens the Starch with Minimal Husk Damage.
The Hopper Can Hold up to 11 Lbs of Grains and the Roller Body Features an Alloy Block Frame That Houses Three Steel Rollers on Oil-impregnated Bronze Bushings. the Drive Shaft and All Axles Are Integral to the Roller, Which Makes Clockwise or Counter-clockwise Drive Possible. a Hand Crank Is Included, but the Mill Can Be Easily Motorized with a Corded Electric Drill. You Don't Need Any Additional Attachments, Just Stick the Drill on and Go. Stainless Knurled Knobs Allow a Gap Spacing Adjustment Range of 0.070". Adjusting Is Simple - Just Loosen the Adjustment Screws, Adjust the Gap and Tighten the Adjustment Screws.
This Grain Mill Is Constructed Using Materials That Will Last a Lifetime. Cold Rolled Steel for the Rollers, and Aluminum for Body and Stainless Steel Hopper and Oil Impregnated Brass Bushings. the Grain Mill Is Professional in Grinding Barley, Wheat and Other Cereals. It Is Provided with Adjustable 2 Rollers Which Can Be Crushed Cereal Well and Peeled Shell off Perfectly, so As to Be Good for Brewing Beer in Future. the 2 Rollers Design Has the Main Advantage That It Draws the Grain Better and Gives Improved Throughput.
This Equipment Is Perfect for Large Batches and High Efficiency Milling. with Two Rollers, All Your Grain Will Be Crushed Twice in One Cycle. the Crush Is Through the Fixed Gap Between the Top Two Rollers. the Initial Pass Slightly Flattens the Grain, Getting It Ready for the Next Crush That Breaks Apart the Grains and Loosens the Starch with Minimal Husk Damage.
The Hopper Can Hold up to 11 Lbs of Grains and the Roller Body Features an Alloy Block Frame That Houses Three Steel Rollers on Oil-impregnated Bronze Bushings. the Drive Shaft and All Axles Are Integral to the Roller, Which Makes Clockwise or Counter-clockwise Drive Possible. a Hand Crank Is Included, but the Mill Can Be Easily Motorized with a Corded Electric Drill. You Don't Need Any Additional Attachments, Just Stick the Drill on and Go. Stainless Knurled Knobs Allow a Gap Spacing Adjustment Range of 0.070". Adjusting Is Simple - Just Loosen the Adjustment Screws, Adjust the Gap and Tighten the Adjustment Screws.
Notice:
You Will Need to Supply or Build a Base to Set the Mill over a Grain Bin or 5 Gallon Bucket.
Package Included:
2 Aluminum Bars
1 Pc Malt Mill
1 Pc Hopper
1 Pc Crank Handle
Some Accessories
If You Need Installation Guide, Please Contact Us.
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
