Product View
Detail
2. The chip integrates a high-performance Xtensa® 32-bit LX7 dual-core processor, ultra-low-power co-processor, Wi-Fi baseband, Bluetooth baseband, RF module and peripherals.
3. Supports a variety of low-power operating state, to meet the power requirements of various application scenarios.
4.ESP32-S3 chip provides rich peripheral interfaces, and has a variety of unique hardware security mechanisms, perfect security mechanisms to enable the chip to meet the strict security requirements.
5. Application areas include: smart home, industrial automation, consumer electronics, intelligent agriculture, service robots, audio equipment and so on.
Xtensa® 32-bit LX7 dual-core processor, main frequency up to 240 MHz
Built-in 512 KB SRAM, 384 KB ROM memory and support for multiple external SPI, Dual SPI, Quad SPI, Octal SPI, QPI, OPI flash and off-chip RAM
Additional vector instructions for accelerated neural network computation, signal processing, etc.
45 programmable GPIOs supporting popular peripheral interfaces such as SPI, I2S, I2C, PWM, RMT, ADC, UART, SD/MMC host controllers and TWAITM controllers.
Wi-Fi
- Supports IEEE 802.11b/g/n protocols
- Supports 20 MHz and 40 MHz bandwidth in 2.4 GHz band.
- Supports 1T1R mode with data rates up to 150 Mbps
- Wireless Multimedia (WMM)
- Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)
- Immediate Block ACK
- Fragmentation/defragmentation
- Automatic Beacon Monitoring (Hardware TSF)
- 4 × virtual Wi-Fi interfaces
- Simultaneously supports Infrastructure BSS Station mode, SoftAP mode, and Station + SoftAP mode. Please note that when the ESP32-S3 scans in Station mode, the SoftAP channel will change at the same time.
- Antenna Diversity
- 802.11 mc FTM
Bluetooth:
- Bluetooth Low Power (Bluetooth LE): Bluetooth 5, Bluetooth
Bluetooth: Bluetooth LE: Bluetooth 5, Bluetooth mesh
- High power mode (20 dBm)
- Rate support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Advertising Extensions
- Multiple Advertisement Sets
- Channel Selection Algorithm #2)
- Wi-Fi and Bluetooth coexist and share the same antenna
CPU and Storage
- Xtensa® 32-bit LX7 dual-core processor up to 240MHz
- 384 KB ROM
- 512 KB SRAM
- 16 KB RTCSRAM
- 8MB PSRMA
Operating voltage: 3V-3.6V
Temperature range: -40 to 65°C
Depending on your choice of
We only accept your Ebay Address, Please Make sure it's 100% right.
The items you ordered will be shipped out in 3 business day by Hong Kong Air Mail when your payment is clear.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Copyright © 2017 DataCaciques
Product View
Detail
2. The chip integrates a high-performance Xtensa® 32-bit LX7 dual-core processor, ultra-low-power co-processor, Wi-Fi baseband, Bluetooth baseband, RF module and peripherals.
3. Supports a variety of low-power operating state, to meet the power requirements of various application scenarios.
4.ESP32-S3 chip provides rich peripheral interfaces, and has a variety of unique hardware security mechanisms, perfect security mechanisms to enable the chip to meet the strict security requirements.
5. Application areas include: smart home, industrial automation, consumer electronics, intelligent agriculture, service robots, audio equipment and so on.
Xtensa® 32-bit LX7 dual-core processor, main frequency up to 240 MHz
Built-in 512 KB SRAM, 384 KB ROM memory and support for multiple external SPI, Dual SPI, Quad SPI, Octal SPI, QPI, OPI flash and off-chip RAM
Additional vector instructions for accelerated neural network computation, signal processing, etc.
45 programmable GPIOs supporting popular peripheral interfaces such as SPI, I2S, I2C, PWM, RMT, ADC, UART, SD/MMC host controllers and TWAITM controllers.
Wi-Fi
- Supports IEEE 802.11b/g/n protocols
- Supports 20 MHz and 40 MHz bandwidth in 2.4 GHz band.
- Supports 1T1R mode with data rates up to 150 Mbps
- Wireless Multimedia (WMM)
- Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)
- Immediate Block ACK
- Fragmentation/defragmentation
- Automatic Beacon Monitoring (Hardware TSF)
- 4 × virtual Wi-Fi interfaces
- Simultaneously supports Infrastructure BSS Station mode, SoftAP mode, and Station + SoftAP mode. Please note that when the ESP32-S3 scans in Station mode, the SoftAP channel will change at the same time.
- Antenna Diversity
- 802.11 mc FTM
Bluetooth:
- Bluetooth Low Power (Bluetooth LE): Bluetooth 5, Bluetooth
Bluetooth: Bluetooth LE: Bluetooth 5, Bluetooth mesh
- High power mode (20 dBm)
- Rate support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Advertising Extensions
- Multiple Advertisement Sets
- Channel Selection Algorithm #2)
- Wi-Fi and Bluetooth coexist and share the same antenna
CPU and Storage
- Xtensa® 32-bit LX7 dual-core processor up to 240MHz
- 384 KB ROM
- 512 KB SRAM
- 16 KB RTCSRAM
- 8MB PSRMA
Operating voltage: 3V-3.6V
Temperature range: -40 to 65°C
Depending on your choice of
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.Usually, the package will be delivered in about 30 days, some remote areas may wait longer.
1.We accept PayPal payment, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback or open a case without asking for help.
2.Please DON'T leave negative / neutral feedback or open case if you haven't received item in 30 days, International shipping is uncontrollable, sometimes the package may be delayed, If you have't receive item in time, Please remember to contact us to resolve.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.