How to USE
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a 25pin USB port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure
the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which
connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will
damage the driver of the controller.
6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered
completely in the water, then turned on the electric current to
check whether the water-cooling system working well.
7.Installing a CNC control software and Drive such as the EMC2on your computer.
8.Fllowing our manual or guideline to set uo the software.
9. Before turn on the machine, please check all the cable and water- cooling system to
make sure they are working fine.
6.You can enjoy making you dream with using our CNC machine now.
MODEL TWO: 1500W CNC 6040 3 Achse USB port
SKU:3AIX6040USB-1+3AIX6040USB-3+3AIX6040USB-4+TS007USB
Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the usb port driver. These issues are detailed and fully explained on the Software website.
software is electronic one ,once you purchase it,we will send software to your email address at once
Notes:Please prepare a computer with USB Interface.
Description:
Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper,
1. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design,
Arts Creation, Teaching, Student Project and Hobby Purposes.
2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.
3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate,PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.
cnc engraving machine parameters:
X, Y, Z Working Area: 600(Y)*390X*120(Z)mm
Outside dimension: 865*680*570mmL*W*H
Table size: 770Y*490Xmm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height: ≤100mm
Drive unit:
X axis---1605 Ball Screws
Y axis---1605 Ball Screws
Z axis---1605 Ball Screws
Sliding unit:
X axis---High intensity Chromeplate shaft
Y axis---High intensity Chromeplate shaft
Z axis---High intensity Chromeplate shaft
Stepping motor: 57 two-phase 3A 150N.cm
Spindle motor:
(tips1. The spindle motor must connect with the VFD.
2. It cannot directly connect with the supply voltage (AC220V).
3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)
Outside dimension: 65*158mm
Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket
VOLTS, current, power: AC220 /50Hz, 5A, 1.5KW VFD
Spindle speed: 24000 rpm
Max working frequency: 60Hz
Principal axis collet: ER11colletStandard configuration :6mm
Nut Model: ER11-A
Cooling: Water-cooling
Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface: through USB connection with computer
Software environment: Windows XP/Win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Friendly reminder:
The engraver will come with softwareFree Version
If you followed the installation tips offered by us, it works like full version.
installation tips:
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOADING AND installing the software.(This is very important)
Otherwise, the antivirus will regard the cnc software as virus and stop the installation.
PS:Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage: AC220V
Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection: USB port
Command code: G code
Acceptable software: EMC2
Protection: Emergency stop button
Feature:
1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood.
2. water cooling spindle works more stable and durable.
3. High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
4. Software CompatabilityEmc2/Type3/ArtCAMParameter
How to use:
1. Assembling and locating the CNC machine on steady desk well.
2. Make sure that your computer has a USB port output.
3. Place the contral box in a ventilated dry place where there is no dust, no moisture
4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.
6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7. Installing a CNC control software and Drive such as the EMC2on your computer.
8. Fllowing our manual or guideline to set uo the software.
9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine.
10.You can enjoy making you dream with using our CNC machine now.
MODEL THREE:800W CNC 3040 4 Achse PARALLEL PORT
SKU:TS3040 +TS30402 +TS001-B
Attention
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
Notes:Please prepare a computer with DB25 parallel Interface.
Package Content
1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X pump
1X 25pin Parallel lines
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*11mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
1X Manual
2X CD
Attention: This machine needs to be connected to a computer through its controller box with a parallel cable (both included). It is not recommended to connect it to a notebook through a parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect it to computers with 64 bit versions of Windows due to problems with the parallel port driver. These issues are detailed and fully explained on the Software website
Tupianku Image Hosting Service
Description
1.This CNC 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite
board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,
PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5.With the assist of the CNC ROUTER 3040T, your design idea will be real-time display.
CNC ENGRAVING MACHINE parameters:
X,Y,Z Working Area:400(Y)*295X*80(Z)mm
Outside dimension:630*505*495mmL*W*H
Table size:550Y*360Xmm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤60mm
Drive unit:
X axis:SFUO1204-4 Ball Screws
Y axis:SFUO1204-4 Ball Screws
Z axis:SFUO1204-4 Ball Screws
Sliding unit
X axis:High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
Spindle motor
tips1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V/220V).3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension:65*158mm
Material:304 stainless steelCopper coil
Pressure cast aluminum pipe water jacket
VOLTScurrentpower:AC220V/50Hz5A,0.8KW VFD
Spindle speed:24000 rpm
Max working frequency:400Hz
Principal axis collet:ER11colletStandard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency
from 0-24000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision radial beat acuities 0.03mm
Carving InstructionsG code / TAB files / nc file / NCC files
Communication interfacethrough parallel connection with computer
Software environmentwindows XP / win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Friendly reminder: The engraver will come with softwareFree Version
If you followed the intsalation tips offered by us, it works like full version.
intsalation tips
The software perferm better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating VoltageAC220V~240V
Control unitToroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connectionParallel port
Command codeG code
Protection:Emergency stop button
Feature:
1,The NEW 0.8KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
4, Software Compatability:Type3/ArtCAMParameter
How to use
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a 25pin parallel port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will
damage the driver of the controller.
6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to
check whether the water-cooling system working well.
7.Installing a CNC control software and Drive such as the software on your computer.
8.Fllowing our manual or guideline to set uo the software.
9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
10.You can enjoy making you dream with using our CNC machine now.
MODEL FOUR :800W CNC 3020 4 Achse USB AND PARALLEL PORT
sku:4AIX3020T-USB+TS001USB
sku:4AIX3020T +TS001-B
Attention(USB PORT)
Notes:Please prepare a computer with USB Interface.
Attention(Parallel port):
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
Description:
1.This CNC 3020 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
2.It can work with various materials(metallic & non-metallic),
such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite
board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate,
aluminum alloy, acrylic plates, ABS resin double color plate,
PVC foaming board, indentation plates, signs, construction models,
instrument panels, wooden products, etc.
4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5.With the assist of the CNC ROUTER 3020, your design idea will be real-time display.Lathe structure 6061/6063 Aluminium alloy
CNC ENGRAVING MACHINE PARAMETERS:
X,Y,Z Working Area: 300(Y)*175X*70(Z)mm
Outside dimension: 510*390*445mmL*W*H
Table size: 435Y*240Xmm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height ≤50mm
Drive unit
X axis SFU01204-4 Ball Screws
Y axis SFU01204-4 Ball Screws
Z axis SFU01204-4 Ball Screws
Sliding unit
X axis High intensity Chromeplate shaft
Y axis High intensity Chromeplate shaft
Z axis High intensity Chromeplate shaft
Stepping motor 57 two-phase 3A 150N.cm
Spindle motor
Tips
1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V/220V).
3,Please don't change the data setting of the VFD if you are not professional technicians,otherwise it might damage the spindle motor.
Outside dimension: 65*158mm
Material: 304 stainless steelCopper coil, Pressure cast aluminum pipe water jacket
VOLTScurrentpower: AC220V/50Hz5A,800W VFD
Spindle speed: 24000 rpm
Max working frequency 400Hz
Principal axis collet: ER11colletStandard configuration :6mm
Nut Model: ER11-A
Cooling: Water-cooling
Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface: through USB connection with computer
Software environment: windows XP / win7 32bite system
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Friendly reminder:
The engraver will come with softwareFree Version If you followed the intsalation tips offered by us, it works like full version.
Installation tips
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before
DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage: AC220V
Control unit
Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection: USB PORT OR PARALLEL PORT
Command code: G code
Protection: Emergency stop button
Feature:
1,The NEW 0.8KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.
Anti-blackflash,high precision,long life circle.
4, Software CompatabilityType3/ArtCAMParameter
How to USE
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has functional USB port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.
6.Correctly instal the Spindle motor and the heat pump.
The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7.Installing a CNC control software and Drive such as the on your computer.
8.Fllowing our manual or guideline to set up the software.
9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine.
10.You can enjoy making you dream come true with using our CNC machine now.
MODEL FIVE:560W CNC 3040 4 Achse Parallel Port
SKU:PO3040T1+PO3040T2+TS003
Attention:
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
Description
suitable for PCB,wood,Plexiglass,PVC,Crystal Acrylic,RESIN,Plastic,SEALS, MDF,COMPOSITE,Aluminum material,Copper.Not suitableIron.
Item Specifications
CNC ENGRAVING MACHINE parameters:
X,Y,Z Working Area:400(Y)*295X*80(Z)mm
Outside dimension:630*505*495mmL*W*H
Table size:550Y*360Xmm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤60mm
Drive unit
X axis:SFU01204-4 Ball Screws
Y axis:SFU01204-4 Ball Screws
Z axis:SFU01204-4 Ball Screws
Sliding unit
X axis:High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
Spindle motor
Outside dimension:65*158mm
Material:304 stainless steelCopper coil
Pressure cast aluminum pipe water jacket
VOLTScurrentpower:220V/50Hz5A,560W VFD
Spindle speed:25000 rpm
Max working frequency:400Hz
Principal axis collet adopts drill chuck fit 2mm-6mm burs
Speed mode:By adjusting the VFD output voltage and operating frequency
from 0-25000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision :radial beat acuities 0.03mm
Carving InstructionsG code / TAB files / nc file / NCC files
Communication interfacethrough parallel connection with computer
Software environmentwindows XP / win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Friendly reminder:
The engraver will come with softwareFree Version)
If you followed the installation tips offered by us, it works like full version.
installation tips
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regard the cnc software as virus and stop the installation.
PS:
Please don't update the software when installed and it will not need the license Numbers.
Package Content
1× Engraving machine
1× 4th Rotation axis
1 set× Accessories of 4th Rotation axis(5 parts)
1× Control box
1× Rotation spindle motor
1× Connecting wire
1× Parallel cable
1× Power line
2× Engraving knives
2× Carbon brush
2 sets× Clamp tools
1× User's guide
1× Software
MODEL SIX:400W CNC 3040 4 Achse USB and Parallel Port
Attention(USB PORT)
electronic one ,once you purchase it,we will send to your email address at once
Notes:Please prepare a computer with USB Interface.
Attention(Parallel port):
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
LL3040T1-USB+LL3040T2-USB
LL3040T1+LL3040T2
Introduction
CNC 3040 is suitble for Industry,Technology Research,Advertising Design,Arts Creation,Teaching,
Student Project and Hobby Purposes.
CNC3040 is a desktop CNC machine and designd for processing Industrial or Hobby Prototype
Building, Building Model Making,PCB,
Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving
work at office or home.
Exquisite 3040 is a miniature version of mobile longmen structure of carving machine,put on you
computer is like puting a printer or scanner that coordination,and can completely as a compute
peripherals tools,anywhere,anytime,help you to design intent fast real appear.Nonmetal materials
on the milling,and it can also be used to carving simple PCB/CNC.
Application
This 3040 engraer is a user-friendly desktop engraving machine for those with limited space and
/or a limited budget.
The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such
as WOOD, PMMA or other plastic,
MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to
process or make adverstising signs,PCB,
nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,
PVC foaming board,indentation plates,signs,
construction models,instrument panels,wooden products,etc.
Technical Parameters
Effective working travel 275(X)mm*385(Y)mm*57(Z)mm
dimension 610x480*400mm
Max.workpiece dimension 70mm
Work table dimension 320mm*530mm
Frame materials aluminum alloy 6063 and 6061
Leadscrew 1404 double thread Trapezoidal screws
Driving units X axis 1404 trapezoidal screws
Y axis 1404 trapezoidal screws
Z axis 1404 trapezoidal screws
Sliding units X axis Dia.16mm chrome plate shafts
Y axis Dia.16mm chrome plate shafts
Z axis Dia.12mm chrome plate shafts
Stepping motor type 57 two-phase 1.8A
Spindle motor 400w dc motor 500~8000PRM/Min
Principal axis collet ER11 / 3.175 mm
Repeat accuracy 0.05mm
Spindle precision radial beat acuities ≈0.09 mm
Control unit triaxial one-piece drive + ring variable power + PWM speed
Carving Instructions G-code/.tab /.nc / .ncc/.txt
Communication interface through USB port connection with computer
Software environment windows XP / win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Machine weight
28KG
Friendly reminder: The engraver will come with softwareFree Version
If you followed the intsalation tips offered by us, it works like full version.
intsalation tips
The software perferm better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage:AC220V
Control unit:2.5A stepping motor driver plus adjustable spindle speed controller
Computer connection:on board palrallel port/ USB
Command code:G code
Acceptable software:EMC2
Protection:Emergency stop button
Feature
Simple operation and installation
More steady and strong equiped with aluminum alloy frame materials
Can be controlled by computer
software is simple and intellgent
Can control the engraving more precise
Emergency stop button enhance security
Large 3D engraving in soft wood,MDF board,native wood,PVC,Acrylic we suggest use one or two spiral flute ball bits.
.
Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board,
solid wood,composite board plywood,stone
Spindle motor knob is useful for small positioning adjustment ,with steady and strong
support structure.
Cover plates reducing pollution for the screws and shafts.
The reinforced and thickened machine body make transportation absolutely to be safer
and longer life time.
The chrome shafts is not easy to deform,suitable for long time use.
High Precision Stepping motor makes engraving more precise .
How to use
Please see the English user manual to see how to set up the software and how to use this machine.
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a on-board USB port output.
3.Installing a CNC control software and Drive such as the EMC2 on your computer.
4.Connecting the control box with the CNC machine and you computer.
5.Following our manual or guideline to set uo the software.
6.You can enjoy making you dream with using our CNC machine now.
MODEL SEVEN:400w CNC 3040 3 Achse USB and Parallel Port
Updated New CNC 3040T Router Engraver/Engraving Drilling and Milling Machine
Attention(USB PORT)
electronic one ,once you purchase it,we will send to your email address at once
Notes:Please prepare a computer with USB Interface.
Attention(Parallel port):
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
More Precise Stepping Motor
The engraving process is visible as controlled by computer
Simple operation and installation
Engrave almost anything on almost any surface
XYZ axis carving make more precise and and three-dimensional effect
Cover plates reducing pollution for the screws and shafts.
More steady and strong equiped with aluminum alloy frame materials
Reinforced and thickened machine body make transportation absolutely to be safer and longer life time
EXPRESS MAIL SHIPPING SERVICE with TRACKING NUMBER
Introduction
CNC3040 is suitble for Industry,Technology Research,Advertising Design,Arts Creation,Teaching,Student Project and Hobby Purposes.
CNC3040 is a desktop CNC machine and designd for processing Industrial or Hobby Prototype Building, Building Model Making,PCB,Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving work at office or home.
Exquisite 3040 is a miniature version of mobile longmen structure of carving machine,put on you computer is like puting a printer or scanner that coordination,and can completely as a compute peripherals tools,anywhere,anytime,help you to design intent fast real appear.Nonmetal materials on the milling,and it can also be used to carving simple PCB/CNC.
Application
This 3040 engraer is a user-friendly desktop engraving machine for those with limited space and /or a limited budget. The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic,MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to process or make adverstising signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc
Technical Parameters
3040T triaxial engraving machine part parameters:
3040T triaxial engraving machine part parameters:
Effective working travel 275(X)mm*385(Y)mm*57(Z)mm
Shape dimension 610x480*400mm
Max.workpiece dimension 70mm
Work table dimension 320mm*530mm
Frame materials aluminum alloy 6063 and 6061
Leadscrew 1404 double thread Trapezoidal screws
Driving units X axis 1404 trapezoidal screws
Y axis 1404 trapezoidal screws
Z axis 1404 trapezoidal screws
Sliding unitsX axis Dia.16mm chrome plate shafts
Y axis Dia.16mm chrome plate shafts
Z axis Dia.12mm chrome plate shafts
Stepping motor type 57 two-phase 1.8A
Spindle motor:400w dc motor 500~8000PRM/Min
Principal axis collet: ER11 / 3.175 mm
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities ≈0.09 mm
Control unit:triaxial one-piece drive + ring variable power + PWM speed
Carving Instructions: G-code/.tab /.nc / .ncc/.txt
Communication interface: USB
Software environment: win 7/xp
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Machine weight:28KG
Friendly reminder:
The engraver will come with softwareFree Version
If you followed the intsalation tips offered by us, it works like full version.
intsalation tips
The software perferm better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install
the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage:AC220V
Control unit:2.5A stepping motor driver plus adjustable spindle speed controller
Computer connectionUSB port AND PARALLEL PORT
Command code:G code
Acceptable software:,EMC2
Protection:Emergency stop button
Feature
1 year machine part Free warranty
Simple operation and installation
More steady and strong equiped with aluminum alloy frame materials
Can be controlled by computer
software is simple and intellgent
Can control the engraving more precise
Emergency stop button enhance security
Large 3D engraving in soft wood,MDF board,native wood,PVC,Acrylic we suggest use one or two spiral flute ball bits.
Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board solid wood,composite board plywood,stone.
Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure
MODEL EIGHT:CNC 3020 4 Achse 300W PARALLEL PORT