9IMOD Mark4 7inch 295mm Wheelbase Carbon Fiber Frame 5mm Arm X2807 1300KV Brushless Motor 7inch Propeller for FPV 7" Long Range Drone
Features:
1. X2807 brushless motor is the upgraded motor, 12N14P high torque motor design, which is smooth, reliable and powerful.
2. The motor is characterized by support 2~6S lipo. Suitable for multicopter, RC aircraft, drone.
3. Motor KV 1300KV, shaft size 4 x 14mm, motor mount M3*19, which is compatible with 7inch propeller.
4. FPV brushless motor provides the most incredible power and thrust in the lightest weight. Give you a more satisfied experience with your model.
5. Each rotor was dynamically balanced with high speed. High purity copper windings maximize efficiency, good insulation and heat resistance.
Specifications:
Model: X2807
Framework: 12N14P
No. of Cells: 2 - 6S
Length: 32mm
Shaft: M3
KV: 1300
Diameter: 33.5mm
Weight: 50g

Features:
1. 7 inch FPV Frame-The frame is really solid and well balanced, perfect balance between performance and durability.
2. New FPV Racing Drone-Made of high-quality 3K Carbon Fiber, lightweight, small and exquisite, can fly outdoors or indoors in a large space.
3. Easy to assemble, suitable for both beginners and experienced players. The frame is optimized for 7-inch propellers for a smoother free-flying experience.
4. 5mm thickness frame arm, compact design greatly reduce the total weight, small wind resistance coefficient.
5. Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment.
Specifications:
Mark4-7inch 295mm FPV Racing Drone Frame
Propeller: 7 inch
Weight: 121g
Motor to motor: 295mm
Size: 193*223mm
Arms plate: 5mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Side plate: 2.5mm
Camera mount size: 19*19mm
Recommended configuration: (not included)
Flight Controller: RF/Kiss/F3/F4/F7
Motors: 2305/2306/2407/2408/2507/2810/2812
ESC: 30A-70A
Propeller: 7 inch
Battery: 4S 1800mAh-6S 3300mAh

Features:
1. Using PC plastic as material, ensure the flexibility and safety, helping quadcopter to have a better performance.
2. 4pcs/bag, 1 bag includes 2 clockwise and 2 counter clockwise. All the blades can be easily installed and replaced on the quadcopter.
3. Low noise design: With lighter weight and low noise design, this propeller group will make your drone fly more stable and quiet.
4. More powerful: The blade is small in shape, and after precise dynamic balance test, it provides strong power for drone and ensures longer endurance of drone.
5. The props with well balanced, perfectly compatible with FPV racing drone quadcopter.
Specifications:
Item name: 7040 7 Inch 3-Blade Propeller
Material: PC
Propeller Diameter: 7 inch
Pitch: 4
Blades: 3
Center hub diameter: 13.5mm
Center hub thickness: 7.5mm
Mounting hole: 5mm
Adaptor rings: No
Weight: 9g

Features:
1. Betaflight F4 V3S PLUS FC flight controller board for RC FPV drone.
2. Size: 36x36mm, Mounting Holes: 30.5x30.5mm.
3. We updated the FC with high-quality BMI270 gyro. Built-in barometer for accurate height calculation.
4. F4 V3S PLUS also has onboard 5V and 9V BEC output, which supports DJI sky end power supply and provides stable power supply voltage for external devices such as receivers, faxes and cameras.
5. The function of the flight control is to control the drone through the gyroscope on the flight control board.
Specification:
F4 V3S PLUS FC
Item name: F4 V3 PLUS Flight Controller
Size: 36x36mm
Mounting holes: 30.5x30.5mm
STM32 F405 MCU
Dshot support
Drag and Drop OSD configured via Betaflight
Gyro:BMI270
SBUS / PPM AND Spketrum DSMX ports
MicroSD card blackbox
Baro (BMP280)
BEC: 5V3A/9V3A
On-board video filters (only 5V to VTX and camera)
Please note: The F4 V3S Plus Flight Controller only support Betaflight software, INAV firmware is not supported!
60A 4-in-1 ESC
The installation size is 30.5mm*30.5mm, the mounting hole is M4, and it supports shock-absorbing column installation
ESC onboard current sensor.
Weight: 13g
Input voltage: LIPO 2-6S
Continuous current: 60A
Instantaneous current [5 seconds]: 70A
Firmware: BLS J_H_30_REV16_7
Processor: EFM8BB21F16G
The ESC has on-board filter capacitors to suppress the back electromotive force, stabilize the battery voltage, and protect the precision components of the flight control ESC

Package List:
As your choose

Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!

Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.

After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.