Features:
* This is a golf observation instrument that uses precision optics and digital technology to measure distance. It is a very safedistance testing device that does not emit any form of energy and does not cause any damage or damage to the human body during distance measurement activities.
*Two functions
1).GREEN MODE (lawn function)
This feature is specially designed for golfers, you can easily get the distance between your holes.
2).GENERAL MODE (general function)
This function is suitable for ordinary situations. First, you enter the height of the target object, and then you can measure the distance between you and the target object.
Specifications:
*Product Name: Golfs Rangefinder
*Material: plastic
*Size: Approx. 90*50*38mm
*Color: silver
*Weight: about 200g
Objective lens: 28mm;
Eyepiece: 16mm;
Resolution: 13″;
Magnification: 7x;
Farthest test distance: 930 yards (1 yard = 0.914 meters)
Viewing angle: 7.8°;
Power supply: Use two cr2032 button batteries
Package Content:
1 x Golfs rangefinder
Instructions
1). Press the switch/adjustment button to start the instrument, and it will directly enter the lawn function.
2).Used when playing golf:
The height of the ruler in yards (2.6 yards) is entered.
(1) Align the bottom line of the screen with the horizontal line of the lawn.
(2) Press the switch/adjustment button to adjust the position of the scanning line upward to the top of the golf flagpole.
(3) Numbers will appear at the top of the screen to remind you of the distance to the hole.
3). Used to measure the distance of special targets
When the function key is pressed, the instrument enters the normal function state, and the screen will display three digits and 1 decimal point.
If you want to check the relationship between you and the target object (1) Press the switch/adjustment key to enter the general function status, the screen will display three digits and 1 decimal point.
(2) Press the function key to move to the tens digit, then press the switch/adjustment key to enter the number, the range is also 0 to 9.
(3) Repeat the above steps to set each digit and 1 digit below the decimal point.
(4) Press the function key to end the above input process.
(5) Based on the height you enter, the screen will display the minimum distance you can measure.
(6) Align the bottom line of the screen with the bottom line of the target.
(7) Press the switch/adjustment key to adjust the position of the scanning line upward to the top of the target.
(8) Numbers will appear at the top of the screen to remind you of the distance to the target. Please enter its height.
5 things to note
1).The displayed distance is consistent with the entered height unit.
2).The power will automatically turn off 60 seconds after the operation is completed.
3.) Attention! Please do not use this product to observe the sun with your naked eyes, as this may cause damage to your eyes.
