Excellent in service & quality Shipping at PRIME speed 25,000+ satisfied customers1x shock absorber for PORSCHE 911 FG bilstein B6 Series Turbo FRONT
Original bilstein
Description:
If your vehicle vibrates several times while driving on uneven roads or when pushed down while stationary, the shock absorbers may be defective and should be replaced. Creaking and squeaking noises are also an indication of this. Here you can get high-quality replacements from the bilstein brand. In addition to the original B4 replacement, you can usually also find sportier, stiffer B6 and shortened B8 variants in our shop.
This shock absorber is suitable for the specified models with a strut of Bow. The damper designation Series Turbo describes the characteristic size. This consists of the rebound and compression stages of the damper. If you are looking for stiffer (sportier) or softer shock absorbers, you will find many other parameters in our shop.
Hints:
Three different front axle damper struts were installed as standard in the F and G models from '72-'89.
Bilstein Axle Bone (Green):
Depending on requirements, the parton insert can be exchanged. These can be found under the item numbers 3904 (set 1944), 3927 (set 1961), 3935 (set 1966), 3928 (set 1962) and 3551 (set 1924).
Boge/Sachs-Achsbein (Black):
The shock absorbers are bolted and can be replaced with a Bilstein damper. Here too we offer you a selection of different parameters under the item numbers 3926 (Set 1960), 3902 (Set 1942) and 3903 (Set 1943).
G models from 07/85 have an axle strut with an external thread, which is why the shock absorber 3946 (set 1975) (set 1975) with an internal thread of the union nut is suitable for this case.
for The cartridge key 1989 with an inner diameter of 55mm is required for installation.
Koni axle leg (red):
Can be exchanged for a Bilstein axle leg. From 1961 onwards, the company entered racing and particularly equipped Porsche and Formula 1 racing cars. Since then, bilstein has stood forfor many premium manufacturers. After the takeover of Krupp Stahl AG in 1991 and the merger with Thyssen in 1997, the company name ThyssenKrupp bilstein GmbH was created.
Additional Information:
● Shock absorber design: monotube upside-down
● Shock absorber type: gas pressure
● Suitable for original strut manufacturer: Boge
Reference numbers:
Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.
91134191305, 911.341.913.05, 911 341 913 05
91134104203, 911.341.042.03, 911 341 042 03
91134104103, 911.341.041.03, 911 341 041 03
91134191313, 911.341.913.13, 911 341 913 13
91134191306, 911.341.913.06, 911 341 913 06
91134191311, 911.341.913.11, 911 341 913 11
PCG34190300, PCG.341.903.00, PCG 341 903 00
1134191303
91134104402, 911.341.044.02, 911 341 044 02
91134104304, 911.341.043.04, 911 341 043 04
Scope of delivery:
According to figure
Suitable for :
911 F/G 2.0 - 3.2 up to year 06/85
Vehicles with Sachs/Boge axle leg
Item number: 3926
Original bilstein
Description:
If your vehicle vibrates several times while driving on uneven roads or when pushed down while stationary, the shock absorbers may be defective and should be replaced. Creaking and squeaking noises are also an indication of this. Here you can get high-quality replacements from the bilstein brand. In addition to the original B4 replacement, you can usually also find sportier, stiffer B6 and shortened B8 variants in our shop.
This shock absorber is suitable for the specified models with a strut of Bow. The damper designation Series Turbo describes the characteristic size. This consists of the rebound and compression stages of the damper. If you are looking for stiffer (sportier) or softer shock absorbers, you will find many other parameters in our shop.
Hints:
Three different front axle damper struts were installed as standard in the F and G models from '72-'89.
Bilstein Axle Bone (Green):
Depending on requirements, the parton insert can be exchanged. These can be found under the item numbers 3904 (set 1944), 3927 (set 1961), 3935 (set 1966), 3928 (set 1962) and 3551 (set 1924).
Boge/Sachs-Achsbein (Black):
The shock absorbers are bolted and can be replaced with a Bilstein damper. Here too we offer you a selection of different parameters under the item numbers 3926 (Set 1960), 3902 (Set 1942) and 3903 (Set 1943).
G models from 07/85 have an axle strut with an external thread, which is why the shock absorber 3946 (set 1975) (set 1975) with an internal thread of the union nut is suitable for this case.
for The cartridge key 1989 with an inner diameter of 55mm is required for installation.
Koni axle leg (red):
Can be exchanged for a Bilstein axle leg. From 1961 onwards, the company entered racing and particularly equipped Porsche and Formula 1 racing cars. Since then, bilstein has stood forfor many premium manufacturers. After the takeover of Krupp Stahl AG in 1991 and the merger with Thyssen in 1997, the company name ThyssenKrupp bilstein GmbH was created.
Additional Information:
● Shock absorber design: monotube upside-down
● Shock absorber type: gas pressure
● Suitable for original strut manufacturer: Boge
Reference numbers:
Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.
91134191305, 911.341.913.05, 911 341 913 05
91134104203, 911.341.042.03, 911 341 042 03
91134104103, 911.341.041.03, 911 341 041 03
91134191313, 911.341.913.13, 911 341 913 13
91134191306, 911.341.913.06, 911 341 913 06
91134191311, 911.341.913.11, 911 341 913 11
PCG34190300, PCG.341.903.00, PCG 341 903 00
1134191303
91134104402, 911.341.044.02, 911 341 044 02
91134104304, 911.341.043.04, 911 341 043 04
Scope of delivery:
According to figure
Suitable for :
911 F/G 2.0 - 3.2 up to year 06/85
Vehicles with Sachs/Boge axle leg
Item number: 3926
- Messenger, telephone and mail service Mon.-Fri. from 8 a.m. to 5 p.m
.You can also contact us in the national languages
contact by phone.Special conditions for classic vehicle dealers and classic workshops after initial order.1 month right of withdrawal on all goods. Quality promise: We only offer what is good and otherwise point out quality defects.Over 25,000 satisfied customers.Security: eBay buyer protection 
- Shipping at “Prime Speed”: Monday to Friday, all orders paid by 2 p.m. leave our warehouse THE SAME DAY.In addition to standard and express shipping, we also offer local pickup by appointment.Are you looking for shipping costs to your destination country? You can find this information above directly on eBay.You can choose between several options for our shipping.
Click on the image below and then click on "See details".
You have the following payment options in our eBay shop: 
We politely ask you to make an appointment before collection.
A notice: Payment methods may differ on eBay marketplaces outside Germany.
We politely ask you to make an appointment before collection.
A notice: Payment methods may differ on eBay marketplaces outside Germany.
We, the company partworks from Paderborn, are specialized in young and vintage cars, especially the Porsche brand. Our focus is on special parts that are not available through regular specialist retailers or vehicle manufacturers. Our products are developed in-house as well as by friendly, global companies that have the same goal as us: to make available what no longer exists.
partworks: the part works - your legend runs.
Top online shop according to Excellent.org
DIN-ISO 9001 certified quality management
Recognized training company 
If you are missing something in our program, just talk to us and we may already have a solution.
Be a part of our community!
SAVE Visit our eBay shop to find out about new products and discount promotions.
