Item Type: Spot Welding Machine
Current: 30A

1. Installation and commissioning:
a) The electrode clamp is connected to the negative electrode, and the electrode holder is connected to the output positive electrode.
b) Argon passes through the argon pressure reducing valve and is connected to its argon gas delivery.
c) Tungsten needles can be sharpened on a sand turbine, and the tip discharges electricity to work. Inlet, the argon pressure reducing valve is adjusted to the most gas (applicable to models with argon protection)
d) When the tungsten needle is installed, the welding head is extended about 5MM, and the diameter of the tungsten needle is 0.1mm.

2. Operation steps:
a) Turn on the power and turn on the power switch.
b) Adjust the power knob. Generally (coarse adjustment) adjustment scale is 1 ~ 1.5, (fine adjustment) adjustment scale value is 7 ~ 8 (the scale value can be adjusted arbitrarily according to the requirements of the workpiece).
c) Hold the workpiece with tweezers, the workpiece interface is aligned with the tungsten needle (the optimal distance is 0.5MM), and the workpiece cannot contact the tungsten needle.
d) Depress the foot switch with your foot (remove the foot), and the spot welding is completed.

1 x Spot Welder

1 x Power Cord 

1 x Foot Switch 

1 x Tweezers

1 x Welding Torch 

1 x Transparent Base 

1 x Tungsten Needle 

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.