Feature:
1. High‑quality ABS material, with insulation and low melting point performance, safe to use.
2. The heat baffle prevents the skin from touching the bottom of the container without burning the skin.
3. Help moisturize deep skin, improve rough and dry skin, promote blood circulation, and relieve fatigue.
4. It can quickly and easily remove hair from hands, feet, arms, legs, etc., without irritating or harming the skin.
5. Transparent cover, you can observe the wax condition at any time without opening.
6. Suitable for heating beans, depilatory wax and paraffin wax, ideal tool for professional or home use.
Specification:
Condition:100% Brand New
Item Type: Wax Melting Machine
Power: 230W
Plug: EU Plug
Size: Approx. 385 x 230mm / 15.2 x 9.1in
Voltage: 220V
Temperature: 45°C~75° C
Capacity: 5000ml
Instructions:
1. Turn on the power. The display window shows "OFF", and the program standby mode is started.
2. Two working modes of "rapid heating" and "self-regulating heating" can be selected.
3. It is recommended to use the "rapid heating" mode to melt the wax quickly. Long press "ON/OFF" for 2 seconds to enter "Quick Wax Melting" mode, and the display window will display "A-U". In the "Quick Melting Wax" mode, the wax will automatically melt, and "+" and "" cannot be used.
4. "Quickly melt wax", it can be completed in 80 minutes. In this mode, the display window always shows "A-U". The wax is heated at 90°C for the first 42 minutes and at 55°C for the remaining time. When about one-tenth of the wax is left on the lining, open the lid (note: the wax will completely melt due to the residual heat in the pot), so that the wax can be cooled quickly and the waiting time is shortened. After 80 minutes, "A-U" in the display window becomes the actual temperature. At the same time, the buzzer will sound three times, indicating the end of the "quick wax melting" mode.
5. If you do not use the "quick melting wax" mode, please press the "+/" key to start heating in the standby mode. If the display window shows "55℃", it means 55℃ constant temperature heating. In this state, press "+" or "" to set the temperature. You can press and hold "+" or "" to quickly set the temperature. The temperature range of this machine is 45-75℃. After the setting is completed, the display window will display the actual temperature within 5s, and the machine will start to work.
6. After the operation is completed, press the "on/off" button to stop heating. The display window will "show off". Then turn off the power.
How to use paraffin:
1. Disassemble the paraffin, pound it into small pieces, and fill it inside.
2. Then take off the equipment such as rings and bracelets.
3. Clean and dry your hands.
4. Thoroughly wipe away the cuticles on your hands.
5. Apply hand cream and massage to help hands absorb.
6. Put your hands and wrists in the wax. Don't bend your fingers.
7. Put your hand in the wax again, the wax no longer drips, repeat 5 times.
8. Then put on a plastic bag and cotton to keep warm.
9. Take off the cotton after 10 minutes, and remove the plastic bag and wax from the wrist to the finger. Apply hand cream and massage to help your hands absorb it again.
11. Follow the same functional steps to take care of your feet
Package List:
1 x Wax Melting Machine
1 x Cover
1 x Insulation Board
1 x Cleaning Brush
1 x Power Cable
1 x Manual
Note:
1. The machine must prevent dry burning and immersion in water
2. Ensure that the operating voltage is consistent with the voltage marked on the machine.
3. Operators with skin allergies, scars, and acne are advised not to use this machine.
4. Before operating the machine, check whether the wax temperature is appropriate to avoid burns.
5. Before cleaning, unplug the power cord.
