eBay

Feature:

1. With dust‑proof and waterproof structure, it has good durability under the conditions of cooling liquid and iron filings flying
2. No built‑in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)
3. The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output are measured, with high accuracy.
4. Alarm can be sent when overtravel. The product adds a blowing function, which can automatically clean the counter knife .
5. The shell is made of ground 4S material, durable and not easy to damage

Specification:

Item Type: Automatic Tool Setting Gauge
Output Mode: B: NC (normally closed)
Stroke: 5mm
Repeatability: 0.001mm
Electric Shock Life: 3 million times
Protection Structure: IP67
Contact Force: 1.5N
Material of the Contact Area: Hard-bonding
Housing Material: Ground 4S
Protection Tube: 1 meters minimum bending radius R25
Cable: 2 meters oil resistant 4-core
Electrical Aspects:
1. Contact rating DC24V ± 10% 20mA (maximal)
2. When the body of the machine is grounded, use the tool setter to install it on the side of the ground wire.
3. For the tool setting instrument with LED, pay attention to the connection (+) (-) when connecting. Recommended value is 10mA, resistance load.
4. For the output structure when the interface unit is attached, please read the user manual

Package List:

1 x Automatic Tool Setting Gauge

Note:

1. Please control the tool setting speed at 50 ~ 200mm / min

2. Operating ambient temperature range: 0 ℃ ~ 80 ℃

3. Please control the voltage at DC24V and the current below 20mA

4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg