Woofer The Injection Molded Polypropylene Cones produce excellent waveform properties and tight tolerances to ensure the Sculptura subwoofer meets Sinclair’s performance standards. | |
Planar Depth Radiators Sheets of thin resin bonded wood fibers are heat formed, pressurized into planar radiators, and supported by dual surrounds. In the LS210 sealed cabinet, it provides the benefits of a tuned port without the noise caused by air turbulence. | |
Control Module Conveniently located on top of the subwoofer cabinet, it includes volume control and a selection of different bass effects designated with pictures of small, medium, and large speakers and the range of bass that will be reinforced by this setting. | |
50Hz-140Hz This setting gives satellite and small bookshelf speakers the impact required to fill a room with deep bass. If the loudspeakers in the system are equipped with woofers that are 4" or smaller, this is the recommended setting. This setting will reinforce the bass response in the 50Hz to 140Hz range. | |
40Hz-100Hz This setting gives bookshelf and medium sized speakers a deep, rich bass effect. If the loudspeakers in the system are equipped with woofers that are 5-6", this is the recommended setting. This setting will reinforce the bass response in the 40Hz to 100Hz range. | |
30Hz-80Hz This setting is best suited for systems equipped with large, tower speakers. If the loudspeakers in the system are equipped with woofers that are 8" or larger, or are equipped with multiple medium sized drivers (5-6"), than this is the recommended setting. This setting will reinforce the bass response in the 30Hz to 80Hz range. | |
LFE Many digital surround receivers are equipped with their own low frequency crossover control to adjust the bass sent to a subwoofer. If you choose to use the bass management integrated into your receiver then use the LFE setting. The LFE setting, when used with the bass control of your receiver, will provide the thunderous bass associated with digital effects. |
MPN | sw 10.3 |
Form Factor | Standalone |
Brand | Sinclair Brighton |
UPC | Does not apply |
Country/Region of Manufacture | China |
System Configuration | Single Subwoofer |
Connectivity | Wired |
RMS Power | 250 W |
Model | sw 10.3 |
Type | Subwoofer |
Audio Inputs | Stereo L/R RCA |