L2 Series H11 Headlight Bulbs
Superior Chips : 500% brighter than halogen lamps.
H11 light bulbs allow you to see wider and farther, no black spot, No dim, without blinding, making driving safer on the roads.
6500K white light : 6500K white close to nature light, which more penetrating and will not cause eyes fatigue.
Efficient Cooling System, up to 50,000 hours lifespan: whole aviation aluminum body, unique hollow-carved heat sink design and 1,2000RPM turbo cool fan provide super cooling ability, which ensures a longer lifespan up to 50,000 hours.
Plug and Play, Easy Installation: Almost 1:1 mini design as halogen lamps, no tools needed, plug and play, just 5 min installation without any modification.
Waterproof: IP67 waterproof dustproof works well even in extreme weather.
Working temperature is -40℃~+150℃. No matter driving in any weather or at night, the light bulbs can work normally to ensure the safety of the driver.
PURCHASE BEFORE NOTE:
There may be multiple models of bulbs in the same year, Please confirm whether CHUSYYRAY light bulb matches your original bulb before purchasing.
The bulb model may not be marked on the outer package, but it does not affect normal use.
Please note that the positive and negative poles can not be reversed, the wrong polarity will cause the bulbs to not work properly. Check the polarity when connecting the plug ,if it is not work ,try to turn the plug over and reconnect it.
CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. LED bulb is low power device, yet for some vehicles with CAN-BUS system, there may be flashing or error code problems， it may require install decoder or load resistor to avoid hyper flash or fast blinking (decoder must be purchased separately). Those are NOT problems of LED bulb and NOT covered by warranty.
H11 LED LIGHT BULBS
Number of Bulbs: 2
Use for: replacement halogen, not compatible with xenon/HID
Wattage: 40W
Lumens: 6000 Lumens
Color Temperature: 6500K cool white light
Working Voltage: DC 9-36V (Fit 12V, 24V Vehicles)
Over 50,000 Hours Service Life.
Waterproof: IP67
Material: Aluminum Alloy
Installation: Plug and Play
Warranty：1 Years
Light Color：Cool White
Number of Bulbs: 2
Use for: replacement halogen, not compatible with xenon/HID
Wattage: 40W
Lumens: 6000 Lumens
Color Temperature: 6500K cool white light
Working Voltage: DC 9-36V (Fit 12V, 24V Vehicles)
Over 50,000 Hours Service Life.
Waterproof: IP67
Material: Aluminum Alloy
Installation: Plug and Play
Warranty：1 Years
Light Color：Cool White
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Note
1.The pictures are for reference only. The actual product shall prevail.Your satisfaction is our utmost concern.
2.If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Note
1.The pictures are for reference only. The actual product shall prevail.Your satisfaction is our utmost concern.
2.If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.