Features:

♪  1. The product is equipped with intercom function, which can be paired with intercom earphones with a straight line unobstructed distance of up to 1000 meters

♪  2. Large capacity battery for long-lasting battery life

♪  3. Easy pairing, one click voice assistant

♪  4. Intelligent one to two, earphones can be tied to two hands at the same time, convenient and simple

♪  5. The hardcore style is suitable for both full and half helmets, and can be basically installed and used

♪  6. IPX6 waterproof, no fear of harsh weather during use

Specification：

Bluetooth version: 5.0

Waterproof grade: IPX6

Bluetooth distance: 10 meters [Bluetooth pairing transmission distance is limited]

Intercom distance: earphones with intercom function (approximately 1000 meters in a straight line), paired with regular Bluetooth earphones (approximately 20-50 meters in a straight line), or higher, depending on other devices or geographical factors

Channel: bilateral stereo

Microphone: hard label

Color: Orange red

Charging voltage: 5V/1A

Power supply: built-in polymer lithium battery 3.7V 1000MAH

Standby time: 270H

Headphone interface: TYPE-C

Signal to noise ratio: 80dB

Charging duration: about 2.5H

Call duration: can continuously call for 18h

Playback duration: around 25H (pop music)

Frequency response: 80Hz~18KHz

Product size: 88MM * 49MM * 26MM

Product weight: 65g (bare metal)

LED Warning Light:

♪  Bluetooth waiting pairing status: power on key LED flashing quickly

♪  Bluetooth pairing successful: power on button LED light flashing slowly

♪  When paused: The power on button LED light flashes slowly

♪  Bluetooth mode playback: the power on button LED light remains on

♪  Standby mode: Bluetooth mode not connected for 5 minutes, no operation, automatic shutdown

♪  Battery fully charged state: The red LED is off; When the machine is turned on, insert the charger to charge and the machine will automatically shut down. If you need to turn on the machine at this time, please press and hold the on/off button again for 3 seconds to turn it on

A: Introduction to Bluetooth intercom connection operation (After successful intercom connection, the music sound of Bluetooth is turned off, and when the phone comes, it will automatically switch to call mode, and when turned off, the intercom will be restored):

● 1. Two machines are connected for the first time for intercom: After the machine is turned on, without connecting to Bluetooth, one of the machines briefly presses the intercom button to enter intercom mode, accompanied by a prompt sound of "intercom pairing" to start intercom pairing. After successful pairing, there will be a prompt sound indicating successful pairing "intercom connection". When a "dong" sound is heard, the intercom call will start, and the intercom indicator light will remain on for a long time

● 2. After turning on the phone, when Bluetooth is connected to the phone, to connect to the intercom, disconnect the Bluetooth connection first, and then briefly press the intercom button to enter the intercom mode. After the intercom connection is successful, use the phone to search for Bluetooth connection.

B: After connecting two connected machines, the two machines will automatically talk back, or if one of the machines enters the talk back mode, the talk back indicator light will remain on for a long time.

● Telephone answering: The two machines have successfully connected to each other through intercom, and Bluetooth is also connected to the phone. When a call comes in, it automatically switches to answering the phone. After hanging up, the intercom resumes.

C: Clear intercom pairing, restore factory settings, and turn on the phone without connecting Bluetooth and intercom. At the same time, press the volume up/down button for 5 seconds. When you hear a "thud" sound and release, restore

factory settings and clear all pairing information.

D: After using the machine to connect a third-party helmet Bluetooth earphone for intercom calls, neither machine is connected to the phone Bluetooth. After the intercom machine is turned on, it enters intercom mode. The Bluetooth earphone is turned on, and the two begin to connect. After successful connection, there will be a prompt for intercom connection. After hearing the "dong" sound, the intercom will begin

Product List:

Earphones * 1

Earphone base * 1

Microphone * 1

Velcro set * 1

Charging cable * 1

Instructions * 1