Automotive four-wheel aligner magnetic measuring tool camber adjustment aids

Product Name Magnetic Level

Product specification 20MM*30MM*124MM

Structure Ordinary plate type, PTFE slide plate type, basin type, ball type, etc.

Instructions for use 1, remove the four-wheel alignment sensor (fixture), remove the tyre.

2、Suction the magnetic level carefully on the side of the brake wheel disc.

3、Adjust the level to zero position.

4、Attach the necessary parts for positioning.

5、Use the tool, with the help of the magnetic level gauge degree indication.

Adjust the positioning parts to the required measuring angle.

6、Re-measure with the levelling device. If there is a small deviation, just fine-tune it under the car. (Generally, a little deviation will not cause the positioning of the cause.)

Product use After using the four-wheel aligner to determine the measurement data, such as the aligner

After the measurement data of four-wheel aligner is determined, for example, the camber angle of the aligner is greater than the specified value of minus 1 degree, at this time, you need to dismantle the aligning jig, remove the tyre, and replace the required four-wheel aligning parts, and at this time, you will need the magnetic level meter produced by our centre. In the past, when the operator adjusts the camber angle, he operates by his own experience, sometimes there will be errors, using the level meter produced by our centre, you can adjust to the required measurement angle very accurately.