International Customers: All electronic products are packaged for sale in the US with US voltage.

This item is brand-new, factory sealed.

QNAP enterprise NAS with petabyte-class storage

Use QNAP enterprise and all-flash QuTS hero NAS paired with multiple TL-R1600PES-RP JBODs, to obtain both breakthrough performance and massive capacity. The TL-R1600PES-RP supports SATA hard drives, providing greater choice in selecting high-capacity drives. This configuration is ideal for enterprises, science research institutions, and media production companies that require high-capacity storage for backing up or storing virtual machines, containers, and what is produced/generated by their high-performance NAS.



Cascades multiple expansion units

Install the QXP-3X8PES (PCIe Gen 3 x8) or the QXP-3X4PES (PCIe Gen 3 x4) storage expansion cards in your QNAP NAS depending on your requirements for flexible storage expansion.


Note:

1. The TL-Rx00PES-RP PCIe expansion series requires users to connect cables to specific inputs/outputs.

2. Not all NAS models support cascade connections.



Expand existing NAS storage pools

You can expand existing storage pools on the host NAS by simply adding new volumes created on the TL-R1600PES-RP. RAID re-building or complicated settings are not required. All settings can be configured using Storage & Snapshots Manager on the host NAS. The TL-R1600PES-RP is a great solution for accommodating ever-increasing data or backup files.


Note: To achieve better performance, it is recommended to create storage volumes physically located within the same NAS or expansion enclosure, rather than creating storage volumes across the NAS or expansion enclosure.



Power on/off linked with host QNAP NAS

The TL-R1600PES-RP power status is linked with the host NAS, which helps to reduce hardware management tasks for IT staff.Drive Bay
16 x 3.5-inch SATA 6Gb/s
The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/

Drive Compatibility
3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA solid state drives

Hot-swappable
Yes

Form Factor
3U Short Depth Rackmount

Host Interface
PCIe Gen3 x8, 1 x IN (dual SFF-8644), 1 x OUT (dual SFF-8644)

LED Indicators
Front panel: HDD 1-16, Power, Status, Link, Fan error
Rear panel: SAS connector, Enclosure ID

Buttons
Power

Max. number of HDDs/SSDs supported
16

Hard Drive Type
3.5" or 2.5" SATA 6Gb/s and 3Gb/s drives

Operating Temperature
0 - 40 ^oC (32^oF - 104^oF)

Storage Temperature
-20 - 70^oC (-4^oF - 158^oF)

Relative Humidity
5-95% RH non-condensing, wet bulb: 27^oC (80.6^oF)

Power Supply Unit
550W(x2), 100-240V

Fan
3 x 80mm, 12VDC

System Warning
Buzzer

Management
Managed via QNAP QTS / QuTS hero OS
1. Supports disk S.M.A.R.T. information
2. RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6. Support Host-Based Power ManagementItem Dimension (L inchxW inchxH inch)
13 x 24 x 24

Weight
54 lbs

Warranty Information
5 Years