95000PA - Brushless - Sliver/Gray/Black
Product: Handheld vacuum cleaner
Material: ABS
Type: Handheld
Lithium Battery Capacity: 5000mah
Input Current: 6A
Input Voltage: DC-12 V
Power: 120W
2 Power Suction Modes: 95000PA & 10000PA
Dust Blow & Vacuum 2 in 1
Power Cable Length: About 1m/3.28 ft
Vacuum: 95000PA & 10000PA
Decibel: ≤80 decibels
Product Size: as shown in the figure
12000PA - Brush - Green/Gray/Black
Product: Handheld vacuum cleaner
Material: ABS
Color: Green/Gray/Black
Type: Handheld
Lithium Battery Capacity: 5000mah
Input Current: 6A
Input Voltage: DC-12 V
Power: 120W
Vacuum: 12000PA
1 Power Suction Modes: 12000PA
Dust Blow & Vacuum 2 in 1
Power Cable Length: About 1m/3.28 ft
Decibel: ≤80 decibels
Product Size: as shown in the figure
8000PA - Brush - Blue
Material: ABS
Rated Power: 120W
Rated Voltage: DC 7.4V
Vacuum Degree: 8000pa
Rated Speed: 42000rpm
1 Power Suction Modes: 8000PA
Dust Blow & Vacuum 2 in 1
Battery Capacity: 1800mAh
Charging Method: 8.4V USB booster cable
USB cable Length: 1m
Noise: ≤84dB
Operating Temperature: -20℃~+50℃
Weight: 560g
Package Materials Include:
-1x Car vacuum cleaner 8000PA/12000PA/95000PA
-1x high efficiency air filter
-1x Dust blowing 2 sets
-1x Long flat suction nozzle a group of 2
-1x Floor Brush
-1x USB charging
-1x Specification
Instructions for Using:
1. Check whether the power is sufficient before use
2. The use of the filter must be installed, and then open the switch to start the machine
3. Please replace different suction nozzles according to different use occasions.
4. Press and hold the switch for 3 seconds to activate the machine. In addition, there are two speeds of 95,000 Pa adjustable (just press once after starting the hoover to adjust the suction power to the powerful gear).
5. This product is a wet and dry hoover, when sucking water should pay attention to timely open the front cover drainage
6. When charging, red is normal charging, and green is full.
7. Don't use petrol or volatile stain remover to wipe the body.
8. Don't remove the front cover when the machine is working.
About FAQ Solution:
1. How to dismantle it to remove the filter?
In the middle of the vacuum cleaner, you can see a snap that looks like an L-shape. Just need to remove the filter by simply holding the protective cover and rotating it downwards.
2. How to use it as a blower?
Please check if there is a blow nozzle in the accessories included in the package. Simply mount it on the back of the vacuum cleaner, fix it and press the switch to get to blow.
(If you have any other questions, pls feel free to contact us, we will solve your problem smoothly!)