Describe:
100% new and high quality
Color: See picture
Size: 10cm/3.9in long, 7.1cm/2.8in wide
Power: Rated continuous power is 50W, PET: 100W
Frequency: 5-35MHz; (including: 7MHz; 14MHz; 21MHz; 28MHz; amateur band)
Interface: BNC female;
Erection method: 1 meter away from the ground; just connect a 20.2 meter vibrator;
Package Includes:1Set Portable No Tune End Fed Half Waves Antenna
The surface is smooth, the installation is simple, the performance of large and small currents is higher, the heat dissipation area is larger, and the running time is longer.
It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, tilted or vertical radiator (in the case of high frequencies).
Your feed antenna is inherently balanced, so no separate feed is required, and is structurally stable and performs well.
The high-impedance half-wave line is matched to the 50-ohm feed point via an integrated impedance-matching toroidal transformer rated at 10 watts.
It is designed to be used without the use of a tuner and has an SWR ≤ 1.2 in any part of its band after optimizing the slave components.
Note:
1. Please allow 5-10mm differences due to manual measurement, thanks.
2. The actual color of the product may be slightly different from the picture, and the website is caused by various factors such as the brightness of the monitor and the brightness of the light.

Describe:
100% new and high quality
Color: See picture
Size: 10cm/3.9in long, 7.1cm/2.8in wide
Power: Rated continuous power is 50W, PET: 100W
Frequency: 5-35MHz; (including: 7MHz; 14MHz; 21MHz; 28MHz; amateur band)
Interface: BNC female;
Erection method: 1 meter away from the ground; just connect a 20.2 meter vibrator;
Package Includes:1Set Portable No Tune End Fed Half Waves Antenna
The surface is smooth, the installation is simple, the performance of large and small currents is higher, the heat dissipation area is larger, and the running time is longer.
It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, tilted or vertical radiator (in the case of high frequencies).
Your feed antenna is inherently balanced, so no separate feed is required, and is structurally stable and performs well.
The high-impedance half-wave line is matched to the 50-ohm feed point via an integrated impedance-matching toroidal transformer rated at 10 watts.
It is designed to be used without the use of a tuner and has an SWR ≤ 1.2 in any part of its band after optimizing the slave components.
Note:
1. Please allow 5-10mm differences due to manual measurement, thanks.
2. The actual color of the product may be slightly different from the picture, and the website is caused by various factors such as the brightness of the monitor and the brightness of the light.