eBay

Feature:

1. Adopts 4-level 12-slot high- motor design, which can realize maximum power conversion, has more stable performance and higher work efficiency.
2. CNC machine tool processing billet, 6061‑T6 aluminum heat sink, secondary oxidation treatment, has high‑end and fine appearance, more in line with your needs.
3. High-speed ABEC5 ultra-durable sealed bearings, low friction, low noise, high precision, and long-lasting use.
4. 3.5mm gold‑plated connector, 2.3mm output shaft, suitable for 1/16, 1/18 brushless RC cars. M2.5 screws can be used.
5. High balance explosion‑proof rotor, high smoothness, high precision and high speed, dynamic balance can be controlled within 10mg, it can be disassembled and replaced later.
6. Ultra‑thin silicon steel sheet provides excellent performance, high magnetic permeability, high silicon content gives good insulation and heat resistance.
7. The motor adopts precise waterproof design, to get maximum power conversion, high‑purity copper coil has maximum efficiency, temperature resistant scope is 180°‑200°

Specification:

Condition: 100% Brand New

Item Type: Brushless Motor

Material: Metal + Electronic Components

Color:Black + Red

2435 Motor:
Kv (Rpm/Volt): 3300kv
Wattage: 300
Maximum Speed: 60000
Maximum Voltage: <13.2V
Maximum Amperage: 22A
Number Of Rotor Poles: 4
Diameter: Approx. 24mm/0.9in
Length: Approx. 34mm/1.3in
Shaft: 2.0mm
Shaft Length: Approx. 12mm/0.47in
Connector: 3.5mm
25A ESC:
Continuous Current: 25A
Maximum Current: 100A
Motor Type: Sensorless And Brushless Motor
1. Highway: 24xx Size or Smaller Engine With Kv <7200kv
2. / Vehicle/Monster: 24xx Size or Smaller Engine With Kv <4800kv
Applicable RC Car: 1/20 1/18 1/16 Car
Resistance: 0.0014ohm
Battery: 2s Lipo Battery/4-6 Ni-MH Batteries(Not Included)
Bec Output: 5.0V / 2A (Analog Mode)
Size: Approx. 40x32x15mm/1.6 x 1.3 x 0.6in
17G Metal Steering Gear:
Model: S0017M
: 3.2kgf.Cm At 4.8v; 3.5kgf.Cm At 6v;
No-Load Speed: 0.23s / 60° To 4.8v; 0.20s / 60° To 6v;
Product Weight: 21g
Limit Size: Approx. 29.6 x 28 x 13.2mm/1.2 x 1.1 x 0.5in
Working Voltage: 4.8v 6vdc;
Working Frequency: 1520 Hz, Without 333Hz;
Motor Type: DC Motor;
Gear Type: Metal Gear;
Compatible: Suitable For 1/16, 1/18 Brushless RC Cars.

Package List:

1 x Brushless Motor

1 x 25A ESC

1 x 17G Steering Engine

5 x Steering Arm

3 x Screw

4 x Accessories

2 x Manual

Note:

1. Please allow a slight error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

On Apr 16, 2024 at 18:19:05 PDT, seller added the following information: