Technical Specification:
Plug Type: 9005 + H11 High Beam Headlight + Low Beam Headlight
Power(per set): 80W/Bulb
Chips Quantity(each bulb): 2pcs* COB chips
Luminous Flux: 12000LM/set (6000LM/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Cool White 6000K
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
 
Advantage:
* Latest COB chip(USA) light source, 2 luminous faces no blind zone
* Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
* Xenon white light reflect road paint/signs better to show clearer road situation during night driving
* 270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
* All-in-one heat conduction system keep the light bulb in appropriate working temperature
* Built-in constant current CPU, instant full brightness without start-up relay
* Achieve dual ventilation in this comprehensive strengthening design,A large area of holes, leading to the cooling effect without dead angle.

Package Include:
---Pair 9005 HB3 Replace Factory Halogen High Beam
---Pair H11 H8 Replace Factory Halogen LOW Beam
The box is sent randomly

Notes:
Please check the correct size when place order, if you're not sure which size to choose, please send message to us with your vehicle make, model, year, we'll recommend correct bulb size to you.
Please note for some of Germany cars, the car need some special adaptor to fix the bulbs (Normally H7 and H1 need special adaptor)
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L

Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation
process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
 
Contact us:
If the product is not suitable or there is a quality problem, please contact our customer
service directly to solve the problem. We will give you a satisfact.
DataCaciques