Before
purchasing any wheel spacers please measure the gap between the outer
edge of the tyre and the wheel arch. Take 5mm from this figure to help
give the maximum thickness wheel spacer suitable for your vehicle. It is
good practice to work to 5cm less than this figure to allow for
movement in the vehicle suspension. When measuring your wheel gap always
measure both the driver and passenger sides on the same axle as
measurments may differ slightly and you should always work off the
smaller of the two figures. This is especially important as spacers
which have been fitted and / or tested cannot be returned.
Complete Installation Kit
This kit comes with everything you need for a full installation!
Set of 2 High Quality Billet Aluminum Wheel Spacers
Full set of machine pressed studs and nuts
Bolt Pattern: 5x114.3
Thread Pitch: 1/2x20
Thickness: 30mm
Hub bore: 71.5mm
Includes Studs and Nuts
All of our spacers are made out of 6061-T6 Billet Aluminum
BENEFITS:
1. Increase the car wheel track, reduce the body center of gravity, reducing the body deformation
2. To improve vehicle stability and improve handing and other functions
3. Can effectively solve the car speeding when cornering body floated rapidly
Floating lateral tilting the phenomenon such as serious
4. To ensure that the car is more flexible, smooth and safe
5. To be able to make the stability of the vehicle greatly ascend
PCD: PCD
stands for 'Pitch Circle Diameter' and is usually expressed in
millimeters, (inches may also be used). For a 4 or 6 bolt fitment this
measurment is the distance between the centre of two diametrically
opposite bolt holes. For 5 bolt fitments measuring the diameter of an
imaginary circle running through the centre of each bolt hole.
Offset: The offset of a vehicle's wheels is the distance between the centerline
of the wheel and the plane of the hub-mounting surface. This is
typically expressed in millimetres and can be either positive /
negative. The offset plays a significant role in the vehicle's
suspension geometry as well as dictating the distance between the tyre
and suspension. Not to mention the visual gap between the wheel and the
vehicle bodywork.
Stud Pattern: The
stud / bolt pattern refers to the number of studs, (or lugs) the wheel
bolts onto, and the imaginary circle the studs form. Most vehicles have
either 4, 5 or 6 bolt patterns.
Centre Bore: The centre bore (or hub diameter) of a rim refers to the size of the
centre hole in the middle of the wheel. This correlates to the diameter
of the hub centre bore and is usually expressed in millimetres.
Hub Centric: Hub
centric refers to the the the point at which the primary load of the
vehicle is placed. Hub centric wheel spacers ensure less load is placed
on wheel bearings and other suspension components by keeping this load
on the vehicle hub. The alternative is to us 'lug centric' spacers which
rely on the wheel studs to centre the wheel on the hub. Good practice
for fitting spacers of thicknesses greater than 10mm is to use hub
centric wheel spacers.
Vehicle Fitment:
FOR CHRYSLER JEEP CHEROKEE/WRANGLER
FOR FORD JEEP
FOR most FORD Vehicles
FOR Ford Ranger 2WD 4WD Edge Sport XLT
FOR JEEP XJ, KJ, KK, ZJ, MJ Models
FOR Jeep Wrangler TJ YJ
FOR Ford Ranger Explorer
FOR FORD RANGER MUSTANG EXPLORER
FOR Ford Falcon
FOR Ford XB to BA BF FG AU Falcon
FOR FORD Falcon XT XF EA EB ED EF EL to BA BF FG AU Falcon
FOR FORD FALCON PRE AU
FOR Ford EF Falcon Rear
FOR Ford FALCON FG
FOR Ford Falcon/Fairlaine ZH/EA/EL/BA/BF/FG, & AU SERIES
FOR Ford Falcon XF -EL to BA BF FG AU Falcon
FOR Ford XF to BA BF FG AU Falcon
FOR Ford XF Falcon Rear
FOR FORD Fairlane 55-67,FALCON V8 63-65
FOR FORD GALAXIE 60-74,MUSTANG V8 64-68 SHELBY GT500
FOR JEEP CHEROKEE 84-01,LIBERTY 02-12,WRANGLER 87-06
FOR JEEP WRANGLER RUBICON 04-06
FOR JEEP CHEROKEE
1-day handling time & At least 1 year warranty & Fast Local Delivery
Factory Price & Good After-sales service & Easy Return