CUBE BABY BASS EFFECTS
PEDAL
Preface
CUBE BABY BASS is a portable and multifunctional
electric bass effector. It has 3 editable presets, the users also can
customize effectors chain and save.
CUBE BABY BASS has built-in battery,it has Booster,3-band
EQ,Compressor,Chorus,Phaser,Delay,Reverb,8IR slots and a Tuner. Beside, it
support mobile phone recording jack, BT, and computer sound card. It integrates
a variety of function, it is easy-carry and it has excellent sound!
The Power Supply
l lt is equipped
with built-in battery for power supply,which can last for 6 hours after full
charge.
l lt can charge
with the 5V adapter or the power bank.
l I When the
battery run low,you can use the DC 5V/2A adapter,you need 2 hours to fully
charge the battery.
Effectors Chain
Tuner → Booster→ EQ → Compressor→Phaser/ Chorus →Delay/ Reverb→ IR CAB
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
Rear Panel
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
①IN: 1/4"MONO audio input jack.
②Power switch.
③USB jack: Use to charge the
battery/the CUBE BABY BASS can be sound card of computer/you can edit 3 groups
of presets on computer/you can import the IR on computer.
④Audio output jack: It support mobile phone
recording.
⑤Earphone output.
⑥OUT: 1/4"MONO audio output jack.
Front Panel
①BOOST: Boost knob.
②TREB: Treble knob.
③MID: Middle knob.
④ BASS: Bass knob.
⑤COMP: Compressor knob.
⑥ MOD: CHORUS/PHASER.
⑦ SPACE: Adjust the radio of wet and dry of
REVERB/DELAY.
⑧ TIME: Adjust the feedback speed of echo repeats of
REVERB/ DELAY.
⑨IR CAB: 8 IR slots.
⑩VOLUME: Volume knob.
⑪BT indicator.
⑫Charging
indicator.
⑬C footswitch.
⑭B footswitch.
⑮A footswitch.
⑯3 indicators.
Effectors Module
Attention:Please make sure that CUBE BABY BASS is in LIVE mode,then you
can listening-test the 1-6 items of effectors below.
1.BOOST
l BOOST: Booster knob.
2. EQ editor
l
TREB knob.
l
MID knob.
l
BASS knob.
3.COMP
l COMP: Compressor knob.
4.MOD
l MOD knob: The left half
circle is used for CHORUS,the right half circle is used for PHASER.When the
knob is at middle,the indicator turned off,it means the MOD has been turned
off.
5.SPACE
l SPACE knob: The left half
circle is used for REVERB,the right half circle is used for DELAY.When the
SPACE knob is at middle,the SPACE and TIME indicators will turned off at same
time,it means the SPACE module has been turned off.
l TIME knob: Adjust feedback
speed of echo repeats of SPACE.
6.IR CAB
l IR CAB knob: Select the types
of IR.A total of 9 slots,the first slot means the IR has been turned off,the
2-9 slots are 8 types of IR.
SLOT |
IR NAME |
1 |
Base on The IR has been turned off |
2 |
Base on Jensen 10 441 |
3 |
Base on Studio 22 441 Edge |
4 |
Base on SWR 15 4050 |
5 |
Base on Work 15 441 Edge |
6 |
Base on TP5-PV-421 |
7 |
Base on TP5-PV-D112 |
8 |
Base on Work 15 4050 |
9 |
Base on EV 12V441 |
l You can import
the IR files to CUBE BABY BASS on computer.The previously IR will overwritten
with the current IR.
7. Tuner
l In TUNER
mode,these six knobs show the note name of the bass.lf your bass just has 4
strings,so you only look at the knobs with theE、A、 D、G.
l In TUNER
mode,when you turning the string,these three knobs show the pitch: The
indicator lighting up means the string is pitching too low;
The indicator lighting up means the string is at the correct pitch;
The indicator lighting up means the string is pitching too high.
l Press and hold
the B+C footswitchs at the same time for 2 seconds to enter TUNER mode.
8.BT
l This product
supports BT,you can press and hold the "A+B" footswitchs at the same
time for 2 seconds to turn on/off BT.When the indicator lighting up blue,it
means the BT has been connected, then your phone can play music to the CUBE
BABY BASS.When the indicator flashing blue,it means that BT is turning on,but
not in connection.
9.Mobile Phone recording
l This product
supports phone recording function,you can use the recording cable to connect
the Phone and CUBE BABY BASS,then you can use your Phone to get a high quality
recording.
LIVE/PRESET/EDIT Mode
l
CUBE BABY BASS has three operation modes,LIVE mode
is real-time performance mode,EDIT mode is use for edit the three
presets,PRESET mode is the most common state for performance.The initial
power-on default enters PRESET mode, tap the combination nail "B+C"
for LIVE mode,or tap the combination nail "A+B" for EDIT mode.
l PRESET mode is
the most normal playing state,you can use LIVE or EDIT to edit and save three
presets,then Three presets can be used by free footswitchs conveniently in
PRESET mode.
l In LIVE
mode,visual operations can be performed,knob timbre effect is what you see is
what you get,it is suitable for you to customize a effectors chain.You can use
the knobs to improvise the timbre when you performing.
l In EDIT mode,you
can fine-tune and edit 3 groups of presets, better for contrast with other
preset tones.
A. Function Introduction of PRESET mode.
PRESETS |
EFFECTORS CHAIN |
A Footswitch |
Boost+EQ+Compressor+Jensen 10 441 |
B Footswitch |
Boost+EQ+Compressor+Studio 22 441 Edge |
C Footswitch |
Boost+EQ+Compressor+Chorus+EV 12V 441 |
l In PRESET
mode,the VOLUME knob is the final output volume value,you can listen and use
the three PRESETS in real time,but you cannot use knobs to edit timbre.The
A/B/C footswitchs represent 3 PRESETS,when the PRESET had been selected,the
corresponding footswitch-indicator flashing.If all three indicators are off,the
device is in Bypass.
B.Function Introduction of LIVE mode.
l When enter LIVE
mode,the default final output volume value in this mode is 80%,the VOLUME knob
is use for adjust the level of current effectors chain.
l In LIVE
mode,theA/B/C footswitchs can use to open/close the corresponding effect
module,the corresponding footswitch- indicator is flashing/went off.Users can
customize the effectors chain,then press and hold the A/B/C to save.
l In LIVE mode,the
knob lights have only 2 states:lighting on/went off.lf the knob light is off,it
means that the effect of this knob is not on;lf the knob light is on,it means
that the effect has been turned on,and the knob timbre effect is what you see is
what you get.
C.Function Introduction of EDIT mode.
l Switch to EDIT
mode when you tap A+B,the machine will retain the data in the corresponding
knobs before switching.
l In EDIT mode,the
machine always retain the output volume value before switching.
l The knob lights
have only 3 states:lighting on/went off/flashing.lf the knob light is off,it
means that the effect of this knob is not on;lf the knob light is on,it means
that the effect has been turned on,and the knob timbre effect is what you see
is what you get;lf the knob light flashing,it means that the effect has been
turned on,but the knob timbre what you get is diffrent from what you see.
l After you turn
the knob,the flashing knob light will become lighting on,The previously data
will overwritten with the current knob value.When the knob light lighting
on,the knob timbre effect is what you see is what you get.
l In EDIT mode,the
machine always retain the output volume value before switching,the VOLUME knob
is use for adjust the level of current effectors chain.
l After editing the
effectors chain,then switch to PRESET mode,the VOLUME knob become the final
output volume value.Therefore,it is recommended that after exiting EDIT
mode,users immediately turn the volume knob to the position before entering
EDIT mode.So that you can restore the output volume value of the previous
performing.
l In EDIT mode,the
A/B/C footswitchs can use to open/close the corresponding effect module,the
corresponding footswitch-indicator is flashing/went off.Users can fine-tune and
edit 3 groups of PRESETS,then press and hold the A/B/C to save.
How To Customize A Effectors Chain
Let's try to customize a effectors chain similar to Preset “A”.
1.When CUBE-BABY BASS is turned on,tap the "B+C" to enter the
LIVE mode.Then you need to turn off all the effectors,so that all the knob
indicators had been turned off(eccept the VOLUME knob). Next step,you can turn
theVOLUME knob to the value you like.
2. Tap the C footswitch to turn on the COMP+EQ mudle,turn the BOOST
knob to the 12 o'clock position,turn theTREB knob to the 3 o'clock
position,turn the MID knob to the 9 o'clock position,turn the BASS knob to the
10 o'clock position,turn the COMP knob to the 12 o'clock position.
3. Then let's look at theMOD+SPACE mudle.We don't need the MOD and
SPACE,so keep the B footswitch indicator off.
4. Tap the A footswitch to turn on the IR mudle.Turn the IR CAB knob to
the 2th slot,so we had select the "Jensen 10 441".
5. Then let's adjust the level of current effectors chain,turn the
VOLUME knob to the value you like.
6. At this time,we had customized a effectors chain,then let's press
and hold the A footswitch for 2 second to save it to PRESETA.
7. Let's tap the "B+C" to enter the PRESET mode.You can use
the new PRESET A now.
The Software Interface
1.IR EDITOR
①IR files searching button:you can use it to find the IR on your
computer.
②IR files display interface:here is the IR files you had selected,you
can click and listen it.
③Microphone distance simulator:you can adjust the distance of
microphone to speaker.When the distance closer,the sound louder; when the
distance farther,the sound lower.SO,what you need to attention is:When the
distance is100%,you couldn't hear the voice.
④IR saving location:you can use it to select the 1-8 location of IR
slots of CUBE BABY BASS.
⑤Save button:click this button to save.
⑥The IR Factory reset option.
⑦Click this button to Factory reset the parameters of 3PRESETS.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
2. PRESETS PARAMETERS EDITOR
①Select the Preset you need to edit.At this time,if the software and
CUBE BABY BASS are in the same Preset,you can hear the real-time sound of
editing.
②Adjust the level of current effectors chain.
③Adjust the IR.
④Adjust feedback speed of echo repeats of SPACE.
⑤SPACE effector editor:0-13 is use to edit the REVERB,14-17 is use to
turn off SPACE,18-30is use to edit the DELAY.
⑥MOD effector editor:0-6 is use to edit theCHORUS,7-8 is use to turn
off MOD,9-14 is use to edit the PHASER.
⑦Adjust the Compressor.
⑧Adjust the Bass.
⑨Adjust the Middle.
⑩Adjust the Treble.
⑪Adjust the Boost.
⑫Save button:click this button to save the PRESET.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
Technical Parameters
Input: Standard 1/4" jack MONO/TS
Output: Standard 1/4" jack MONO/TS
Sample rate:48KHz/24bit
Battery capacity:780mah
Size:161(L)X57(W)X17.5(H)mm
Weight:260g
Attachment: Charging cable, Recording cable
Seller Policy
Postage & Delivery
All products will be checked carefully and packed in good condition
before shipping.
Products are located in the warehouse in China.
Products will be received within 7-13
business days, If you are in the USA or
North America.
If you are in the Europe, you
will receive it within 7-19 business days.
If you are in the Asia, you will
receive it within 7-12 business days.
If you are in the South America,
you will receive it within 13-50 business days.
If you are in the Other regions and
countries, you will receive it within 13-50
business days.
About order handling time, usually we ship in 1-5 business days after receiving the clearing
payment. We do offer Expedited shipping methods.
Note:
Due to shipping policies restrictions, our shop is unable to ship to
Alaska, Hawaii, Puerto Rico, US Protectorates and APO/FPO address.
Your satisfaction is our aim!
Payment Policy
We gladly accept payment methods eBay approved.
Both of us must comply with the rules and requirements of the eBay. We
want to make sure the transaction is legal and compliant.
If you have any requirements or requests, please contact via eBay
message.
Your satisfaction is our aim!
(After-Sales Service) Return and Exchange
If the product you receive has quality problems, please contact us in
time, we will refund you or replace the product after confirmation.
Product Assurance 30-day unconditional return policy:
①Please keep the product packaging intact and undamaged, the product in
good condition and not affecting secondary sales, and send photos and videos of
the product to the customer service for confirmation.
②For returns caused by non-product quality defects, the buyer shall bear
the shipping costs.
③For returns caused by product quality defects, the round-trip shipping
costs shall be borne by the buyer. Half-year warranty policy.
④The shipping
costs incurred for repaired products shall be borne by the buyer.
⑤If the product
problem is caused by the buyer, the buyer shall bear the cost of parts and
other related maintenance costs.
Feedback
If you have any problems, Please don't give us a negative comment
without reasonable communication, please contact us in time. We’ll deal with
your problems and demands as soon as possible, to help you save money, give you
the best service quality and attitude, you can also buy High-Quality products
from our store!
The most important of all, Your Satisfaction is our aim!