Dental Vibrator Wax Heater Carving Lab Vacuum Forming Model Trimmer Machine New
Dental 3 Well Analog Wax Melting Dipping Pot Heater Melter Lab Equipment
Features
Three Teflon coated non-stick reservoirs
Illuminated On/Off switch
Indicator light that goes off when unit reaches desired temperature
Variable temperatures range = 60°F-270°F (30°C-130°C)
Temperature controlled rapid heating
Weight: 1.5KG.
Voltage:110V
Description:
Dental Lab Equipment Analog Wax Heater Pot is a high quality wax pot and ideal for all dental applications. Its temperature controlled heating system gives you a broad temperature range of 70°F to 237°F (21°C to 112°C). In addition, this wax pot features an insulated thermoplastic housing which remains cool while wax stays hot!
Electric Waxer Carving Pencil knife Machine Double Pen+6 Wax Tip
Description:
This dental lab electric waxer is for dental, jewelry trade, industry, industry of die carving, wax carving and so on
Features
Electric knife you can work at temperatures 50 ℃ to 200 ℃ with button,
Electric carving wax knife is more efficient than other wax metal knife.
It’s significant advantage is the long use time
The LED visual control button makes the operating more conveniently
2 circuits have been arranged, and they can operate at the same time
The working temperature can be kept even after power off.
Two temperture way display (Fahrenheit Or Celsius temperature display)
Technical data:
Voltage：AC100 50/60HZ
Power：20W
Safe electric current：2 A
Weight: 1.1kg
Temperature：50-200℃
Measure：119*159*73mm
Packing list:
Main unit 1pc
Tip 6pc
Pen 2pc
Pen base 2pc
Dental Lab Vibrator Shaker Oscillator Machine Dentist 4' Round
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty.
Specifications
Voltage:110V/60Hz ±10%
Power: 100W
Dimensions: 14x15x11cm
JT-51B Dental Model Square Vibrator Vibrating Model Oscillator Lab Equipment
This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time.
It has two grades, weak grade, strong grade, can be changed as necessary.
Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light
comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work.
Features:
Voltage:110V/60Hz+-10%
Power:120W
Maximum load:<=2KG
Dimension:20.5×15.5×10cm (Inner packing size)
Package Including:
1X New JT-51B Small Square Dental Vibrator (110V)
Dental Centrifugal Casting Machine Apparatus Crucibles Centrifuge Equipment
Features:
1. This centrifugal casting machine is indispensible for the production of high quality oral restorations. Durable and reliable,our casting apparatus easily handles most alloys with high melting-points that are used by dentists.
2. Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs.
Specification:
Dental Centrifugal casting machine(AE-5)
Working model:Manual
Weight: 13kg
Speed: 7000rpm
Package Including:
1 X Centrifugal Casting Machine Dental Lab Equipment Teeth Healthy
Dentist Driller Dental Lab Laser Pindex Drill Machine Pin System Equipment
This machine is special precise equipment for odontology,which uses laser to guarantee the hole’s accuracy and this drill is made of hardened alloy.The most important is the depth of drilled hole can be adjusted.
Features:
Laser beam guide for accurate location
High speed motor
Technical Data:
Voltage:110V
Rotation Speed:5500rpm
Power: 80W
Drill Bit Diameter: Φ3×Φ1.85、Φ3×Φ1.95
Size: 140x150x320mm
Packing List:
1* Main Unit
1* Power Cord
2* Tip
Dental Lab Equipment Vacuum Forming Heat Molding Machine Material Former
NOTE: Please do not forget to turn off heating switch after using the machine,otherwise the heater will be burnt
Features
1. Heavy-duty vacuum motor provides precise downward suction
2. Features a symmetrical heating system, ensuring uniform heat distribution
3. Adjustable, rust-resistant body accommodates various materials
4. Suitable for a wide range of clinical applications
5. Non-rotating sliding frame makes operation easy and stress-free
6. Compatible with all dental thermoplastics
7. The motor of vacuum former is strategically placed below its perforated stage,
which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Application Range
1. Decolorization braces forming and production
2. Orthodontic appliances remain, arch molding and plywood production
3. Periodontal disease, fluoride treatment and production of the molding tray4. Temporary, permanent base, dental care of the molding and production
Technical Data
Model: JT-018
Voltage: 110V/60Hz ± 10%
Power: 600W
Forming size:110mm*110mm.
Dimensions: 25 × 21 × 30cm
Weight: 6kg
Package With
Main unit x 1
Power cord x 1
Manual x 1
JINTAI Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel
Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Possible reason：① Axon is loosing ② Disc is not plain enough。
How to solve it：①Dissemble the disc⒃ with spanner，make the snap
Ring tightly；② change the disc。
The machine does not work when power on
Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。
How to solve it：① change the fuse（22） which inside the socket；② change the motor；③ change the
Voltage: 110V/60Hz±10%
Power: 500W Rotational Speed: 2800 rpm
Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Attention:
If there is some abnormal noise when working onPossible reason：① Axon is loosing ② Disc is not plain enough。
How to solve it：①Dissemble the disc⒃ with spanner，make the snap
Ring tightly；② change the disc。
The machine does not work when power on
Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。
How to solve it：① change the fuse（22） which inside the socket；② change the motor；③ change the
Specifications:
Power: 500W Rotational Speed: 2800 rpm
Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
Content:
1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment
Statement (FDA, ARTG)
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies. If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies. If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
Welcome toauto-parts-stations??
Thank you for your support!
If you have any questions,please feel free to contact us!!!
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
