Application Guidance
We recommend professional installation as we cannot accept responsibility for an issues arising due to installation/application error by the purchaser.
Carefully inspect your decal kit before application. Please contact us if any defects are detected and do not use the film, as we cannot process refunds for defects once the material has been used in any way. We check all products before they are posted to ensure quality control.
Clean all surfaces to which the film is to be applied with a specialist pre-wrap surface cleaner. Do not use spirits. Make sure that any remaining detergents are thoroughly and completely removed.
The car must be completely clean and dry when applying the film.
Only apply in temperatures > +15° C
Carefully remove all elements that obstruct the application (e.g. outside mirrors, door handles, trims, windscreen wipers etc.).
Inspect all surfaces and edges for residual preservation wax or polish. Any residues must only be removed with a silicone-free citrus-based industrial detergent. Surfaces with more stubborn stains can be cleaned additionally with a commercially available insect or tar remover.
Never apply detergents that use nanotechnology to establish nano-sealing or nano-coating on the surface to be cleaned. Please observe the manufacturer's instructions.
Make sure that the surfaces, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals.
Only install using specialist tools designed for vinyl wrap installation. Never use a squeegee without a felt pad, as this can cause scratching to the high gloss/satin laminate.
Ensure you are working in a clean, dry and dust free environment.
Line up the decal while backing paper is still on the decal to ensure it is level and correctly placed.
Remove one side of decal from the backing paper and work from one side to avoid creasing and air bubbles.
Use a squeegee to smooth the decal onto the paintwork while removing the backing paper.
Once applied remove the overlaid application tape carefully and slowly.
Post heat to no more than 93 degrees Celsius.
For any further information feel free to contact us.
Vinyl Solutions do not represent any Original Equipment Manufacturer (OEM) in any way and are a fully independent company. Vinyl Solutions do not claim in any way that the products we supply are of OEM origin other than where specifically stated in the item description.
Any reference to OEM names, OEM product identification descriptions or OEM model numbers is for identification only and does not indicate that it is an OEM part unless otherwise confirmed as such in the item description.