Features:
*Key has been activated
*Suggestion: WiFi is very power -consuming. Use only when activating keys. It usually only shows the date, time, please close it when you go out to save battery electricity
*How to view KEY ？？？Open the panel, click next to click Info, and the rotation, look at the picture above
*You can see the 8 -bit key, the standard is 12 bits. If necessary, please contact us for asking.
The key will be stored in the machine for a long time without worrying about the firmware update
*Added CW, RTty F4 F8 decoding function, four audio spectrum
*ChangeLog FW 4.17 Air
*Firmware H-RADIO 4.17 AIR:
Optimization of the memory usage of the microcontroller has been carried out to speed up the interface.
Removed the display of the RSSI/SNR signal in the form of a waterfall for the ILI9341 screen.
Fixed a frequency display error for the ILI9341 screen in FM and CB mode.
Fixed audio spectrum output error for the ILI99341 screen.
Improved accuracy of frequency display on the audio spectrum.
Added different modes of operation of the beeper for different modifications.
Fixed a frequency display error in the list of cities.
Fixed the error of displaying the decoder screen in CB mode.
Fixed the error of displaying the clock in the medium and long wave ranges in the synchro mode.
Added FT8 and FT4 decoder.
Changed the display of the DIGI decoding.
Added scrolling of the DIGI decoder buffer with saving decoded data to the decoder.log file in SPIFFS.
Fixed screen scrolling errors in SCAN.
Fixed the error of not muting the sound when starting a scan in SCAN for SYNC modulation.
Fixed the error of getting time via RDS.
Added support , LNA and a function button for the ATS-Decoder Pocket receiver.
Added on indicator, encoder lock and antenna options for all receiver modifications.
Added a quick access panel to settings, encoder lock and antenna options by clicking on the corresponding indicator.
*SI4732 ATS-Decoder Pocket full-frequency wireless electric receiver for DSP receiver FM LW (MW and SW) and SSB with 2.4 "touch screen
Specification:
*Oxical material: aluminum alloy
*The built -in lithium battery 3.7V /4000mA
*Type-C charging interface, maximum 1.2A charging current
*Profaceful to the Type-C interface upgrade solution
*Do supports 3.5mm stereo audio output
*Forian interface BNC:Support 3.5mm audio FM antenna
*Che screen :2.4 -inch touch screen
*Outage audio power: 1.5W
*Course size: 120*115*48mm (excluding protruding part of the size)
*Frequency Range:
-FM: 64-108MHz/RDS function
-LW: 153-500KHz
-MW: 520-1710kHz
-SW: 1730-30000KHz
-SSB: 17030kHz
*Features:
1. Support the 2.4 -inch touch screen function
2. Support broadcast search
3. Support digital keyboard direct input frequency
4. Support HAM fast channel
5. Support AM width: 1-6k
6. Support SSB width: 0.5 -4.0k
Package Included:
1 x radio receiver set
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
