Model

ACFRE00104A

Overview

Freezer i35 A-RGB

LGA1700 COMPATIBLE

The Freezer i35 A-RGB is already compatible with Intel's Alder Lake LGA 1700 processors. Even though the socket has increased in size compared to its predecessor, the hotspot remains centred in the area of the CPU die. The Direct Touch heat pipes of the Freezer i35 A-RGB cover this area completely.

COMPACT PERFORMANCE MEETS MODERN DESIGN

Optimised performance meets modern, black design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.

ULTIMATE PERFORMANCE THERMAL PASTE

The Freezer i35 A-RGB comes with a 0.8 g syringe of the new MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.

FAN OPTIMISED FOR HEAT SINKS

The fan installed in the Freezer i35 A-RGB benefits from all the advantages of the P-fans. With their low-vibration, power-saving motor and hydrodynamic plain bearing, they combine quiet and efficient operation. Despite its high fin density, the fan guarantees a high static pressure with its focussed air flow and is therefore ideal for use on radiators and heat sinks. The speed of the fan can be dynamically controlled via PWM and can thus be optimally adapted to any scenario.

IMPROVED INSTALLATION AND UNLIMITED RAM CLEARANCE

The Freezer i35 A-RGB is a socket-specific installation variant for Intel Socket LGA 1700, 1200 and 115x. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer i35 A-RGB. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.

MAKE YOUR SYSTEM SHINE

The Freezer i35 A-RGB fan has 12 digital A-RGB LEDs in the fan hub. These can be controlled autonomously from each other and enable the iconic rainbow effect as well as countless other lighting options. The fan can be connected directly via a 5 V 3-pin RGB header on the mainboard and is compatible with the software and connectors of leading mainboard manufacturers. Alternatively, the cooler can also be illuminated via an external Controller and synchronised with the lighting of other hardware.

Compatibility

Intel Socket

1700, 1200, 1155, 1151, 1150

Ram Clearance

unlimited

Operating Ambient Temperature

0 - 40 °C

Heatsink

Heat Pipes

4

Fin Material

Aluminum

Number of Fins

54

Fin Thickness

0,4 mm

Thermal Paste

MX-5 (0.8g)

Fan

Fan Size

120

Fan Speed

200 - 1700 rpm

Fan Bearing

Fluid Dynamic Bearing

Noise Level

0.35 Sone

Current

0.12 A

Connector

4-Pin

RGB Specifications

LEDs

12 A-RGB LEDs

Connector

3-Pin 5V-DI-GND Connector

Current / Voltage

0.4 A/5 V

Cable

450 mm cable with 80 mm sharing cable, black

Dimensions

Length

91 mm

Width

133 mm

Height

158.5 mm

Weight

746 g