Features:

Turn the control knob to the position of “CLOSE”.

When changing or reconnecting the gas cylinder, please stay outdoors or away from others.

Adjust the gas cylinder collar slit to match the positioning label of the multi-purpose torch, and gently press it vertically and turn it 35 degrees to the right.

Make sure there is no gas leak. If there is gas leaking (smelling smell), immediately take it to the outdoor ventilation area, find the flame and close the leak; if you want to check other leaks, please go to the outdoor airy place, use soapy water to detect Whether it is leaking, do not use the flame to detect.

Ignition (use an open flame to ignite)

Turn the knob to “open” and then set fire to the flame.

Now available, adjust the flame size between "OPEN" and "CLOSE" as needed.

During the two-minute warm-up period, be careful of the flame sway; and the welding gun should not be perpendicular to the ground at an angle of more than 15 degrees, otherwise the flame sway will occur.

After two minutes of warm-up, the torch can be freely at any angle, keeping the label facing up to reduce flame instability.

Shut down:

Turn the control knob to "close" to turn off the gas.

After use, separate the clamp gun and the gas cylinder.

After use:

Check if the torch is clean and dry

Store separate torches and gas cylinders in a cool, well ventilated area, and cover them with their covers.

Specifications:

- Material: Brass

- Size: 14 x 4.1 x 2 cm

- High quality early to clean brass material, portable and easy for carry.

- Defrosting and thawing frozen water pipes plus other plumbing work.

- Ergonomic design for comfortable holding in the hand.

- Safe and convenient to use, compact and portable.

- Suitable for camping fire, welding, soldering or brazing.

- Warm Tip: Dear buyer, due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!

Package includes:

1 x Flamethrower Burner (Gas Cylinder Not Included)