Product description:
light Source Model:CSP Chip,super bright
Power: 50W
Lumen:6000LM
Operating voltage:DC9-32V
Beam Type:High beam & Low beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle:360°
Bulbs Color : White
Lifespan:over 50000h
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 67
Connector Type:Plug and Play
Application: Headlights Headlamp Lamp Bulbs High or Low Beam
Color Temperature: 6000K
IP67 rated water and dust seal,over 50000hrs lifetime
light Source Model:CSP Chip,super bright
Power: 50W
Lumen:6000LM
Operating voltage:DC9-32V
Beam Type:High beam & Low beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle:360°
Bulbs Color : White
Lifespan:over 50000h
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 67
Connector Type:Plug and Play
Application: Headlights Headlamp Lamp Bulbs High or Low Beam
Color Temperature: 6000K
IP67 rated water and dust seal,over 50000hrs lifetime
Usage: headlight+foglight
(2pcs/set) CSP Hi-Lo Beam headlight conversion kit
Latest CSP chip light source,/360 degree no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the en of the bulb does not come in contact with the interior
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the en of the bulb does not come in contact with the interior
Package Included:
4PC Light
9007 (High Beam/Low Beam) + 9145/9006 (fog light)
4PC Light
9007 (High Beam/Low Beam) + 9145/9006 (fog light)