1x Indoor 220v Mains 360° Surface Mounted Microwave Motion Sensor with Daylight Control.

If you require additional quantities, we can offer a deal that suits you, please contact us.

Description

The surface-mounted microwave sensor optimises energy-efficiency by relating use of lighting to occupation (motion) in an area as well as to the amount of daylight contribution. The unobtrusive, surface-mounted unit is perfect for mounting onto ceilings within corridors, stairwells, lobbies and a wide range of other areas.

Features

• Motion and daylight detection.

• Fully adjustable for time-out (from 10 seconds to 12 minutes) and daylight-sensitivity.

• Ideal for energy saving installations in the workplace, corridors, offices, toilets etc.

• 360 degree detection zone for optimum coverage.

• Up to 16m detection range.

Specification

• Diameter: 103 mm

• Height: 44 mm

• Power Source: 220-240V AC - 50/60 Hz

• Power Consumption: 0.9W

• Maximum Load: 1200W (incandescent lamps), 300W (energy-saving lamp)

• Detection Range: 1m - 8m radius (adjustable)

• Time-Out Period: adjustable 10 sec (+/-3 sec) to 12 minutes (+/- 1 minute)

• Ambient Light: 3-2000 lux (adjustable)

• Installation Height: 1.5m to 3.5m

Installation (by qualified electrician only)

• Avoid use in areas subject to drafts from radiators, air conditioning, etc.

• Not recommended for external use.

• Ensure maximum load (per lamp type) is not exceeded (see specification).

• Switch off power.

• Remove front cover (turn anticlockwise).

• Unscrew mains cover and mount base to ceiling.

• Connect power and load (see below).

• Screw back power cover.

• Adjust settings, replace cover: switch on power.

Testing and adjusting settings

• To test, turn LUX dial fully clockwise (max), turn the TIME dial fully anticlockwise (min) and turn the SENS dial to centre position.

• Once power is switched on there is a 30-second warm-up period, after which lights switch on upon detecting motion and stay on for 10 seconds after no motion is sensed.

• To increase ON period, turn TIME clockwise.

• To reduce daylight level at which sensor operates, turn LUX anti-clockwise.

• To adjust range/sensitivity, turn SENS dial.

Condition: Brand New - Never Used - New in Box